GregoryKatz

updated

5 months ago

G

GregoryKatz

1 Rookie

•

8 Posts

•

44 Points

0

366

June 3rd, 2026 12:02

R760xa PERC H755N Front (Embedded)

Hello,

I have several new servers with NVMe drives installed in a backplane. In the current configuration, all NVMe drives are connected to a RAID controller, and the controller is connected to the motherboard through a single cable to port SL11_CPU2_PB6.

My goal is to reconfigure the system so that all NVMe drives are connected directly to the motherboard (PCIe direct connection), without using the RAID controller.

I was unable to identify the correct cables or enablement kit required for this configuration, and I could not find the appropriate SKU or DPN for the necessary parts.

Could you please advise which SKU or DPN should be ordered in order to connect the NVMe backplane directly to the motherboard?

For reference, the servers are brand new and currently configured with the RAID controller connected between the backplane and the motherboard.

Any guidance would be greatly appreciated.

Best regards,
Gregory

  • DELL-Joey C

    Moderator

    •

    4170 Posts

    •

    20965 Points

    0

    1

    Posted June 8th, 2026 06:28

    Hi,

     

    Just to check, are you referring to the cabling on Figure 3. Configuration 0: 6 x 2.5-inch NVMe GPU https://www.dell.com/support/manuals/en-us/poweredge-r760xa/r760xa_ism_pub/cable-routing?guid=guid-27af6dbf-ca83-496c-ae0a-593874d3bdf3&lang=en-us

     

    If yes, here are the part numbers I can find:

     

    Y3YKY ASSY Cable, NVMe, SL11, X8, Backplane
    V30VR ASSY Cable, NVMe, SL12, X8, Backplane
    YPPVN ASSY Cable, NVMe, SL15, X8, Backplane

     

    But I would like to inform, since you mentioned that the server are new, the server do have warranty contract, it is recommended to go through sales process. 

    DELL-Joey C

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did. 

  • DellMartinS

    Moderator

    •

    3885 Posts

    •

    25816 Points

    0

    0

    Posted June 5th, 2026 12:23

    Hi,
    best would be contact sales for an offer

    with kind regards Martin/ Liebe Grüße Martin

     

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

     

    DELL-Martin S

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell


  • GregoryKatz

    1 Rookie

    •

    8 Posts

    •

    44 Points

    0

    0

    Posted June 7th, 2026 05:47

    Hello,

    Thank you for your reply.

    I have already contacted the sales team, but the response time has been quite long.

    I was hoping to save some time by checking whether you could provide the answer directly here.

    Thank you in advance for your assistance.

    Kind regards,

    Gregory

  • GregoryKatz

    1 Rookie

    •

    8 Posts

    •

    44 Points

    0

    0

    Posted June 9th, 2026 05:24

    @DELL-Joey C​ Thank you so much, I think this is what I need.