Mtexter

updated

1 year ago

M

Mtexter

3 Novice

•

237 Posts

•

853 Points

0

5009

November 27th, 2017 12:00

R730XD - PCI-E H330 to 2-slot rear backplane

Hi All,

We have an R730XD 24+2 chassis with SSD's both in the front and rear slots.  We want to have the rear slots controlled by a PCI-E H330 controller, and the front to be controlled by a mini-mono HBA330, with software RAID that we'll set up later.  Two major questions arise from this. 

1. We were able to connect the rear BP to the H330 with a straight-to-90 SFF-8643 SAS cable, but it's a weird fit and we'd like to find a part number for a straight to straight version of the same cable.

2. When we make this connection with our existing cable, we get a message saying "CBL0009: Backplane 0 connector A0 is not connected."


No amber lights, everything appears to work, but I don't like seeing this message.  Can anyone provide assistance? 

Thanks!

  • DellMartinS

    Moderator

    •

    3885 Posts

    •

    25816 Points

    0

    0

    Posted August 11th, 2025 07:57

    Yes, it is possible to boot from a Dell H330 PCIe RAID controller connected to a 2-slot rear backplane on an R730XD server. However, there are a few considerations and steps you need to follow to ensure it works correctly:

    1. Update Firmware:

      • Update the H330 firmware and the R730XD BIOS to the latest versions using Dell's support site.
    2. Configure RAID:

      • Enter the H330 RAID configuration utility (usually by pressing Ctrl+R during boot) and create a bootable RAID volume on the drives connected to the rear backplane.
    3. Adjust Boot Order:

      • Enter the BIOS/UEFI setup (press F2 during boot) and navigate to the boot settings. Add the H330 PCIe device to the boot order.
    4. Install OS:

      • Boot from your OS installation media and install the OS onto the RAID volume created on the H330.
    5. Install Drivers (if needed):

      • Some operating systems may require additional drivers for the H330. Load these during installation if prompted.

    Potential Issues:

    • If the H330 is not recognized in the boot order, double-check the BIOS settings and ensure the RAID volume is properly initialized.
    • If the OS installer doesn't detect the drives, verify the RAID configuration and ensure the correct drivers are available.

    with kind regards Martin/ Liebe Grüße Martin

     

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

     

    DELL-Martin S

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell


  • DELL-Josh Cr

    Community Manager

    •

    9801 Posts

    •

    45350 Points

    2159

    0

    Posted November 27th, 2017 16:00

    Hi,

    Backplane 0 A0 should be from the integrated controller to the front backplane. Which cables are connected to which ports?

  • Mtexter

    3 Novice

    •

    237 Posts

    •

    853 Points

    2161

    0

    Posted November 28th, 2017 11:00

    We have the front backplane (a0 and b0) hooked to the mini mono hba330, and the rear backplane hooked to the pci-e h330 at port A of the controller
  • DELL-Josh Cr

    Community Manager

    •

    9801 Posts

    •

    45350 Points

    2161

    0

    Posted November 28th, 2017 12:00

    Try clearing the hardware logs and see if the error goes away. 

  • jtostenr

    18 Posts

    903

    0

    Posted June 14th, 2022 11:00

    I have the same issue, was there a resolution?

  • DELL-Charles R

    Moderator

    •

    4730 Posts

    •

    25476 Points

    893

    0

    Posted June 14th, 2022 13:00

    Hello jtostenr,

     

    Is this something that was working and now is not?

     

    I'll start with attaching wiring images. Please let me know if it helps.

     

     

     

    image1.pngimage2.png

    DELL-Charles R

    Social Media and Communities Professional
    Dell Technologies | Enterprise Support Services
    #IWork4Dell

    Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!

  • DELL-Shine K

    6 Operator

    •

    3042 Posts

    863

    0

    Posted June 15th, 2022 20:00

    What chassis you have? is it 12X3.5 or 24X2.5. Connecting rear to separate controller is supported on 24X2.5 chassis.

  • DELL-Joey C

    Moderator

    •

    4170 Posts

    •

    20965 Points

    862

    0

    Posted June 15th, 2022 20:00

    Hi @jtostenr,

     

    Could you provide us the rear backplane DPN#? 

    DELL-Joey C

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did. 

  • jtostenr

    18 Posts

    872

    0

    Posted June 15th, 2022 20:00

    This is a server I purchased recently and originally only had an H330 mini (which I swapped for an HBA330 mini) and added the H330 PCIE. The H330 was in the wrong riser, so I relocated it to Riser 1, but still have the same issue. The only difference is that I am using the cable with part # 08KX9H. Isn't that electrically equivalent to the 8RJM1 cable or is there some other difference?

  • jtostenr

    18 Posts

    861

    0

    Posted June 15th, 2022 20:00

    It is the 24X2.5 with rear backplane # 0NHDXG