UNSOLVED

Nancy0623

updated

13 years ago

N

Nancy0623

6 Posts

0

7210

October 10th, 2013 04:00

Poweredge C1100: One of the drive bays doesn't recognize 1TB SATA3 HDD.

I bought a refurbished C1100 server from a seller. The spec is as follows.

  • processor: dual intel xeon L5520
  • RAM: 24GB
  • 4x3.5" trays
  • RAID Controller: Perc 5
  • Dual 10/100/1000 Ethernet

Out of 4 bays, the second bay from the left doesn't recognize the hard disk. I've tried 4 1TB SATA3 (with 3 different major brands) disks into all the 4 bays and only the second one cannot detect the HDD. There is nothing on the PD screen. When I tired to run HDD on the second bay only with  the rest of the drives in the other three bays removed, an  error message " No PD Present" on the screen.

The funny thing is when I inserted 500GB SATA HDD into the second bay, it runs well. Of course SAS works well in every bay. Only 1TB SATA3 is the problem here.

What am I supposed to do?

 

  • DELL-Chris H

    7 Practitioner

    •

    9682 Posts

    •

    48046 Points

    415

    0

    Posted October 10th, 2013 09:00

    Nancy0623,

    That sounds like it may be caused by a cabling issue. If you power down and reseat the sata cables on the backplane and board, does the problem persist? If you swap 2 of  cables does the issue move? LAstly, what firmware version is the controller at?

    Let me know what you find out. 

    DELL-Chris H

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!