
UNSOLVED
PERC trouble on PE2550 w/new motherboard
Hello;
I had to replace the motherboard in a PE 2550 recently, and I'm having trouble enabling the PERC 3/Di.
I've moved all the hardware over (including the RAID key, RAM and battery) but can't seem to get the system to enable/recognize the controller.
The system POST shows messages from the Adaptec AIC-7899; the usual PERC messages aren't coming up and the RAID option isn't available in the BIOS setup, only SCSI.
Is there something I'm missing?
Thanks,
Lance
Message Edited by Uryene on 07-24-2007 09:06 AM
I had to replace the motherboard in a PE 2550 recently, and I'm having trouble enabling the PERC 3/Di.
I've moved all the hardware over (including the RAID key, RAM and battery) but can't seem to get the system to enable/recognize the controller.
The system POST shows messages from the Adaptec AIC-7899; the usual PERC messages aren't coming up and the RAID option isn't available in the BIOS setup, only SCSI.
Is there something I'm missing?
Thanks,
Lance
Message Edited by Uryene on 07-24-2007 09:06 AM
Responses (2)
Solutions (0)

DELL-GaryS
777 Posts
336
0
Posted July 25th, 2007 22:00