UNSOLVED

xboomerx

updated

20 years ago

X

xboomerx

85 Posts

0

6018

December 3rd, 2006 05:00

Do I need buy PERC RAID Key 8286R card?

I have a DELL Poweredge 2400 server with Six(6) SCSI 9GB drives.
I replaced the failed Dell PERC2/QC Raid card.
Udated to the lastest firmware for PERC2/QC Raid card.
The system is not detecting any of the six drives.
Do I need buy PERC RAID Key 8286R card?
Where do you install this key card
and what software do I run?
How do I get the system detect the six drives
and work correctly?
What driver do I need to install Windows XP?
What is the driver that is needed when you hit "F6"
during the Windows XP installation?  
Thank You
Bob Whitman

  • SSEiYah

    21 Posts

    175

    0

    Posted December 4th, 2006 01:00

    OK, as I mentioned to you in an earlier thread, you need to determine why the drives are not being detected.



    when you go to the ctrl-a bios...the POWEREDGE EXPANDABLE RAID CONTROLLER one....then you should have 3 options, container configuration utility, disk utilties, and one more I forget....then go to disk utilities, its the second option after doing ctrl-a on bootup....what do you see?



    the perc cards NEVER fail....well they can but rarely...I'd look into a failed backplane or a failed scsi cable, possibly even a corrupt array but first we need to see if the drives are being detected in the ctrl-a bios in disk utiliteis.



    the raid key has nothing to do with this.



    Furthmore XP will not support ANY perc cards that I know of. You can use windows 2000 server or windows serve 2003, or windows 2000 professional on the system.


    Dell never made a driver for the PERC SCSI cards like you have...for xp