Dell PowerEdge T110 Server no longer starting up after installing new memory
Today I got 4x 4GB sticks of PC3L-12800E DDR3 Memory for my retro Dell PowerEdge server, after installing all modules into the machine, it turned on but immediately shut off. The only lights on the server are the motherboard LED and the front diagnostic light (indicating a pre boot error). I went back to the original 2GB DDR3 stick that I was using as a placeholder, but the same issue occured.
I have tried:
Power cycling.
Clearing NVRAM with the NVRAM_CLR jumper.
Removing the CMOS battery.
Using one stick of memory.
Trying other sticks of memory.
And trying other power cables and outlets cause why not.
My guess is that the PSU has been killed somehow, I noticed that it was switched to 240V (which worked the whole time) but now it had caught up to it.
(also the memory is a bit too fast for the system but I didn't think that would be an issue, silly me!)
I know this is an old system but I love messing with ADDS and Group Policy stuff.
@DELL-Joey C yes it was able to power on before installing the memory. All 4 diagnostic LEDS flash once before turning off, then leaving the amber error light
Pstar77a4e36
1 Rookie
•
5 Posts
•
16 Points
0
0
Posted June 4th, 2026 02:17
Found a spare PSU that worked with the system and it didn't change anything