UNSOLVED

jswatts2

updated

9 months ago

J

jswatts2

1 Rookie

•

4 Posts

•

2 Points

0

398

February 27th, 2026 14:47

OptiPlex All-in-One Plus 7420, using HDMI in as a camera feed

We use a Dell all-in-one to put hymns, prays, etc on a large screen during church services.  The software can accept a camera feed and send it to the big screen.  Can I use the HDMI in port as a camera input (HDMI Is coming from another computer)

(edited)

  • DELL-ChrisM2

    Community Manager

    •

    2000 Posts

    •

    10021 Points

    0

    0

    Posted February 27th, 2026 15:18

    In theory, yes. The HDMI in port should show the camera input on the AIO display. I do not think that it can do a simultaneous PIP (picture in picture) setup?

    1. Showing Windows OS Desktop
    2. Showing HDMI in data as PIP window

    To find the User's Guide, what specific model of Inspiron AIO Desktop?

     

    #IWork4Dell

  • jswatts2

    1 Rookie

    •

    4 Posts

    •

    2 Points

    0

    0

    Posted February 28th, 2026 21:00

    @DELL-ChrisM2​ 

     

    OptiPlex AIO Plus 7420

    Other numbers on the machine are;

    Reg Model / W31C

    Reg Type No.: W31C002

    and 

    <To protect your privacy, all private information was removed from this public post. DELL-Admin>

    (edited)

  • DELL-ChrisM2

    Community Manager

    •

    2000 Posts

    •

    10021 Points

    0

    0

    Posted February 28th, 2026 23:34

    This is confusing to me, "HDMI Is coming from another computer". If a second computer is sending an HDMI signal into the OptiPlex All-in-One Plus 7420 HDMI-in 1.4b port, how are you going to connect the camera to that same port? 

    Based on the OptiPlex All-in-One Plus 7420 User's Guide pages 12/13/14 =

    The HDMI-in 1.4b port would connect to the camera HDMI-out port. This should allow you to "see" the camera output on the AIO display via the camera software once you press the Display Built-in Self Test (BIST)/Display input button. Then use the software to send it to the big screen.



     

    #IWork4Dell

  • jswatts2

    1 Rookie

    •

    4 Posts

    •

    2 Points

    15

    0

    Posted March 3rd, 2026 05:37

    @DELL-ChrisM2​ 

    I apologize for starting a new discussion rather than continuing the existing one.  I have tried a dozen times to post to the old one, including logging out and back in.  It will not post my comment.

    Thank you for your reply.  Let me explain the setup we now use and what I want to add to it.  

    We have two AIO computers.  The 7420 is running presentation software called Proclaim, which has prepared slides: announcements, the words of hymns, prayers, etc.  This goes to the HDMI out port, which is connected to a splitter.  The splitter feeds this video to the projector and to a video mixer (ATEM Mini Pro).  The Mini Pro also has input from two cameras mounted on the back wall of the sanctuary.  A human drives the cameras and selects which of the three video streams to send to the livestream.  The Min Pro sends its output to the second AIO computer, which is running OBS and Chrome to livestream on YouTube.  This has been working for some time.

    Occasionally, something is happening at the front of the sanctuary that is hard for the congregation to see, e.g., the pastor is sitting on the floor with the children for a story.  In that case, I would like to send the video from a camera to the projector.  The OBS software can send the same feed it is sending to the livestream to the AIO's HDMI out port.  The Proclaim software can accept a camera feed, merge it with a blank slide, and send it to the projector.  If I could get the HDMI stream from the Livestream computer to the Proclaim computer as a camera feed, I would have what I need.

    I did find the Display Input button, and the HDMI feed from the Livestream computer appears on the 7420 AIO’s screen.  But the 7420 no longer responds to the mouse or keyboard and acts purely as a monitor.  Is that the only way to use the HDMI input?

    I am thinking now, that I need to buy an external video capture card to convert the HDMI into a camera stream on USB to send to the Proclaim computer.  Any suggestions are welcome.

    Note: This comment was created from a merged conversation originally titled OptiPlex All-in-One Plus 7420, using HDMI in as a camera feed

    Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    0

    March 1st, 2026 20:01

    1. We have two AIO computers. 

     

    2. I did find the Display Input button, and the HDMI feed from the Livestream computer appears on the 7420 AIO’s screen.  But the 7420 no longer responds to the mouse or keyboard and acts purely as a monitor.  Is that the only way to use the HDMI input?

     

    3. I am thinking now, that I need to buy an external video capture card to convert the HDMI into a camera stream on USB to send to the Proclaim computer.  Any suggestions are welcome.

    1. Not sure how this came to be. I'm guessing some perceived form-factor benefit or maybe they were donated. Fortunately, many "video devices" that were traditionally internal PCIe cards can now also be purchased as USB devices (and the newer versions of USB can handle the bandwidth).

     

    2. I had a (circa 2014) Dell 24inch AiO for a while (until it decided to brick-itself on the final-released Dell BIOS-firmware flashing). Anyway, it had one of those HDMI-Inputs, and yes, that it the way it works ... turns the $1000 computer into a $100 monitor. The HDMI-Input port "sounds good" until you actually try to use it.

     

    It is this way because it's a simple/inexpensive feature. Also, because HDMI is designed to be a closed-video-stream from "player to screen". It also has HDCP. Yes, you can Split-it, but notice that is just "a clone" of what you are already getting.

     

    3. Yall obviously know what you are doing over there. Sounds like you are on the volunteer IT and/or video-production team.  Depending on the size of the sanctuary, there are limits on cable-lengths and other things. Just keep building the system as you have ... copy what other churches and venues are doing. I don't remember seeing churches/venues on www.AVSForum.com , but surely there is a forum where yall can get together and discuss/plan new-installs and upgrades.