
UNSOLVED
D
DJinSanDiego
8 Posts
0
322
April 24th, 2022 05:00
9020 MT: 3rd party network adapter card/PCIe slot looses power in sleep state (no WoL via that card possible)
I have added an after market network adapter card to an Optiplex 9020 MT with BIOS A25. Whenever the system goes into sleep mode, the card loses power -- the LEDs are off.
The builtin Intel based NIC behaves as expected and it is able to wake the PC.
I would like to be able to have the new card also be able to respond to a WoL packet but without any power supplied to the board that is not possible.
I believe I've examined/tried setting all BIOS settings which might result in the power being removed from the PCI slots when sleeping but there's been no joy.
Is the completely removal of power to the PCI slots expected/normal behavior?
.
Responses (1)
Solutions (0)

DELL-Cares
Moderator
•
27844 Posts
•
748 Points
229
0
Posted April 24th, 2022 23:00
We tried reaching you on a private message asking for the Service Tag number to ascertain the warranty but did not receive a response. Please feel free to reply to the private message whenever you are available.
#IWork4Dell
For all non-technical issues that require your private data, we must communicate via a private Direct Message
Dell Partner GEM Program, Out of Warranty Support options, No free goodwill repair, Get a copy of your Dell invoice