I have an optiplex 7060 SFF that I want to install a decent low profile PCIe x16 graphics card in but cannot with the factory installed PSU.
I am wanting to know if Dell has or had a 500w upgrade option available for this model and if so what part number is it or if their is a third party PSU with the 6 pin connector or a supported 24 to 6 pin adaptor available.
It is being used for a HTPC with transcoding and have already spent money on upgrading memory to 32GB AND added A 1TB m.2 drive so ideally don't want to buy a new system.
I live in Australia so am looking for parts I can get in AU to avoid import duties.
Re: Seems like a case swap maybe a better option as it will allow a full height gpu and better psu.
there’s the rub. After optiplex 7020/9020, Dell optiplex motherboard has dropped microATX form factor. 7060 motherboard, along with 7050, 7040, 7070, 7080/90 use odd proprietary form factor that does not fit any non-Dell case. Gamer nexus S Burke has heavily criticized Dell for not caring for environment and adding future land fill with useless Dell parts. Dell wants you to buy new model than upgrading your optiplex.
Which video card do you plan to use that requires 500w psu upgrade in 7060SFF?
Given it is a SFF case it would be nearly impossible to find a low profile and also powerful video card that fits the case. Users had tried some entry level and low profile gpu upgrade in 7060 or 7070SFF such as low profile gtx 1650. This card does not need 500w psu. See this video https://m.youtube.com/watch?v=LVZJ4zc1oRU
note double slot width card can only be installed in pciex4 slot (black). single slot card can be installed in pciex16 slot (blue). The video explains this well.
if you consider gtx 1650, psu calculator estimates a 300w psu suffices. Dell makes 300w or 360w psu for XE3 that is compatible with 7060. Chat w Dell support to get a quote.
Dell doesn't make a 500W unit for this. You could modify the case and shoehorn in an SFX power supply like the corsair SF600 like another user did and use a Moddiy Adapter.
The other ugly option is to remove the internal power supply and use a standard EPS12V power supply OUTSIDE the case with the wires running in the hole left behind by the removed power supply. Not all units work. EVGA 500B1 was used and worked for a 3650.
Seriously? Maybe need to return this 7060 then and get a tower system from different vendor. I got a bargain on this one. At least the m.2 and ram can be used in simular PC's. Thanks for the information
These part numbers / models should be compatible (fits case) with Optiplex 7060 SFF (and higher/later, incl. Precision SFF, just further they do need two CPU jacks):
But really depends on what limits you need on separate 12V rails, therefore it's better to check first if it has enough Amps (12Va{1/2} 12Vb 12Vc etc. , normally it's 18A .. and relevant combination with total) on required lane (since extra Wattage is rather for another rail, not designed to be delivered via the same, it's just another power jack for your AddOn card).
I've got mine via e-bay and it's automatically booked all taxes and duties (China to UK purchase/import) with breakdown on e-bay invoice, didn't have to do or pay anything on top.
Interesting. I used to believe the 360w and 500w Dell psu with two 4 pin cpu connectors would work for 7060 that has only one 4 pin cpu socket. After all most modern aftermarket generic psu do provide 4+4 pin cpu and user can just use one or both 4 pin depending on motherboard. However, this presumption has met some serious doubt now after recent users report of two blink amber No POST error when users tried to use the Dell proprietary 500w in 5060 and 7050. it is still an unresolved issue. Can any user provide a positive proof that the 500w works in 5060/7060/7050?
Upgrading modern Optiplex SFF psu to 460/500w has a number of serious limitations:
1. Dell SFF case cannot physically support high power gpu. only low profile (entry level) gpu can fit the case. in this regard, there may not be a need for 500w psu.
2. Dell proprietary motherboard can not be moved to non Dell tower case
3. Dell 500w/460w psu for 7080/7090/7071 with two 4 pin connectors may not work for older series 7070/7060/7050.
redxps630
11 Legend
•
16431 Posts
•
83176 Points
5805
0
Posted May 27th, 2022 06:00
Re: transcoding gpu
https://vasportscomplex.com/best-gpu-for-plex-transcoding/
Re: Seems like a case swap maybe a better option as it will allow a full height gpu and better psu.
there’s the rub. After optiplex 7020/9020, Dell optiplex motherboard has dropped microATX form factor. 7060 motherboard, along with 7050, 7040, 7070, 7080/90 use odd proprietary form factor that does not fit any non-Dell case. Gamer nexus S Burke has heavily criticized Dell for not caring for environment and adding future land fill with useless Dell parts. Dell wants you to buy new model than upgrading your optiplex.