Got my XPS on monday. I can only get the internal wireless (the 1350) to connect to my Dlink router at 11mbs. If I set the dlink basic rates to 1-2-11-22 it connects but never gets an IP address. I have to leave the basic rates at 1-2-11. Tried changing all kinds of other settings but nothing helped. anyone else run into this problem?
Have you tried connecting with a different computer / router? I recommend updating the firmware on the router as well as the drivers for the 1350 card.
I will check the router firmware tonight. The drivers on the XPS are the latest off Dell's site.
I have 2 other computers that connect to the router at 22mbs however they are using dlink cards. The XPS was about 5 feet from the router so distance should be fine (just FYI).
Thats not a DI-624 if it has an option to connect at 22Mb, the DI-624 is a 802.11g router with an atheros chipset. The DI-614 is a 802.11b router with a TI chipset.
As to connection problems with non-TI chipsets to a TI chipset running at 22Mb I've had that issue plenty of times which forced me to use standard 802.11b (i.e. 11Mb) in order to get the network working so not sure if there is much you can do
Right, with the D-Link Airplus "b" routers (DI-614+) you have to disable the 4x option in the router - then the other Dlink + cards will only connect at 11mb - thats the price of propriatary methods.
DELL-BobT
3125 Posts
479
0
Posted September 30th, 2004 14:00
Mark,
Thank you for using the Dell Community Forum.
Have you tried connecting with a different computer / router? I recommend updating the firmware on the router as well as the drivers for the 1350 card.