UNSOLVED

lnelson15

updated

23 years ago

L

lnelson15

10 Posts

0

14276

April 2nd, 2004 19:00

Using WPA-PSK security causing disconnect - Inspiron 1100/TM1300PCMCIA/NetgearWGT624 Wireless Router

Hey there,

When using WPA-PSK (Wi-Fi Protected Access - Preshared Key with TKIP) security method for encryption and security between my router and wireless device, my wireless connection gets the system connected normally to the router and onto the Internet and local LAN at bootup. After being connected about 1-2 minutes, the connection fails. The WLAN utility show good radio and the connectoid in the tray for the wireless connection shows to be connected. At this point I cannot ping the router or obviously see to the Internet. The only way to easily reestablish communications is to disable/enable the wireless conectoid. At this point the wireless connection thru the router to the Internet and local LAN holds up well for the rest of the session. This error is infinitely repeatable. If I change the security method to WEP with 128bit Open in both the router and wireless connection, the system connects normally at bootup and the connection holds well for the rest of the session.

I realize that this new security methods implementation for Wi-Fi has some growing pains, but I sure hate to have to buy a different wireless device for my Inspiron to have good security. I have seen postings that resembled these symptoms since getting the system in mid November of last year but no real definative answers. Anyone else with this type of issue that has had a successful resolution?

 

  • tolmant

    12 Posts

    376

    0

    Posted April 4th, 2004 03:00

    Have you installed the latest WPA patch from Microsoft?  I had similar issues before updating my system with their WPA patch.
  • lnelson15

    10 Posts

    376

    0

    Posted April 4th, 2004 12:00

    Hey there,

    Yes, I put the KBA 815485 patch on which has been out over a year now. Is there one that I missed? I have tried the recent driver update for the TM1300 and the WGT624 firmware is the latest version for the V1 model. I can repeat this circumstance at will so it is pretty solid.

    Message Edited by lnelson15 on 04-04-2004 08:59 AM

  • Neil Soane

    15 Posts

    376

    0

    Posted April 4th, 2004 13:00

    The latest Microsoft WPA update (KB826942 seems to be dated 31-10-2003, mind you I've just installed it and doesn't make any difference to my connection problems with the 1300 using WPA-PSK on TKIP. The previous drivers at least seemed to connect to the wireless router (Belkin F5D7630) however the newer truemobile app/driver won't connect the router whatsoever.

    I'm beginning to think that the problem lies with the router handling of the security rather than the card + drivers. If anyone knows how to fix this problem I'd really like to know.

    As for your drop off problem, have you tried allowing the truemobile app handle all the wireless connectivity, ie turn off the 'let windows handle.....etc' this fixed a few similar problems to yours when using WEP. As yet my problems on WPA are still there.

    Neil

  • lnelson15

    10 Posts

    376

    0

    Posted April 4th, 2004 13:00

    Hey there,

    I will check to see if KB826942 is on the laptop. I believe I saw that in the list of installed software using the add/remove programs utility. I am not sure whether the problem is the TM1300, the WGT624 or the OS.

  • froggy68300

    35 Posts

    376

    0

    Posted April 5th, 2004 15:00

    Check that you have the latest firmware for your router (Netgear has recently released a lot of new versions for their products to fix the instability pb).

    Download the latest Dell driver for TM1300 (released 2 weeks ago). It has worked for a number of users.

    Also, make sure the Power Management when you are off AC power for your laptop is turned off (if your connection doesnt drop off when you are on AC power, there you are).

  • lnelson15

    10 Posts

    376

    0

    Posted April 5th, 2004 19:00

    Hey there,

    Thanks for the tips! I have all of those things done. The Netgear WGT624V1 is at the latest firmware rev. and I am using the latest Dell drivers for the TM 1300. The issue is apparent with or without the charger turned on or any specific power profile.

  • froggy68300

    35 Posts

    376

    0

    Posted April 6th, 2004 07:00

    Have you tried unchecking the 'Let windows manage wireless connections' and let the TM utility drive the connection (reboot to check if it works)?
  • lnelson15

    10 Posts

    376

    0

    Posted April 8th, 2004 16:00

    Hey there,

    Something just the opposite.

    Well fellas, it looks like a failure on my part to follow all of the basic setup instructions. It turns out the a simple checkbox that is supposed to be checked in the Dell Wireless WLAN card utility on the wireless networks tab. The top checkbox "Let this tool manage your wireless settings" was not checked. I checked same, rebooted 5 times without loss of intial connection. DOH!

    P.S. Dell could save us "know it all techs" and plethora of others that don't always read all of the instructions some trouble by defaulting that switch to checked instead of not checked. Just out of curiousity I went the Broadcom sheet in the hkey_local_machine/software/ registry hive. It is now populated with all sorts of stuff that was not there when that box was not checked.

    Message Edited by lnelson15 on 04-08-2004 01:05 PM

    Message Edited by lnelson15 on 04-08-2004 01:20 PM