UNSOLVED

Joanne1

updated

24 years ago

J

Joanne1

4 Posts

0

164843

September 18th, 2002 14:00

Ghost 7.5 and the Intel Pro 1000

I am trying to create a DOS boot disk for Ghost 7.5 and I keep getting the error Unable to locate the NIC. I know the NIC is working because I had it on our LAN. I have used the latest drivers for the card. Anyone have any suggestions?

  • droid256

    73 Posts

    961

    0

    Posted September 18th, 2002 21:00

    Make sure you are using the correct DOS NDIS 2 driver on your ghost disk. An updated NDIS 2 driver can be found at:

    http://support.dell.com/us/en/filelib/results.asp?sid=PLX_PNT_P4_GX260〈=EN&lib=5&os=DOS&searchtype=filter&devid=2439

    Droid

  • Joanne1

    4 Posts

    961

    0

    Posted September 19th, 2002 11:00

    Thanks for the suggestion, but I have tried to download that file and everytime I get an error saying that the page cannot be loaded.

  • Joanne1

    4 Posts

    961

    0

    Posted September 19th, 2002 12:00

    Actually, I downloaded it from the Europe site.

    I had to do some tweaking on the disk but it works great now, thanks for the help!

    Joanne

  • droid256

    73 Posts

    961

    0

    Posted September 19th, 2002 12:00

    Well, it may not like trying to transplant my settings to you, go to <ADMIN NOTE: Broken link has been removed from this post by Dell> and pick GX260 for the system, Dos for the operating system and network drivers for the download type.

    Droid

  • Chele17

    1 Message

    961

    0

    Posted October 7th, 2002 10:00

    Hello

    I am having problems creating a boot disk for the NIC Intel 1000 on a GX260. I have managed to obtain the driver which is something. However, I am wondering whether I need to specify an IOADDRESS or SLOT or something similar in the Protocol.ini?

    If anyone has got this working would they so kind as to share their protocol.ini with me. It would be appreciated?

    Thanks :)

    Regards

    Michele


  • Joanne1

    4 Posts

    966

    0

    Posted October 7th, 2002 11:00

    Hi Michelle,

    If you let me know your email address I will send you all the files on my boot disk that work for me.

    Joanne

  • nicole1

    1 Message

    966

    0

    Posted October 9th, 2002 12:00

    Hi Joanne,

    I'm having the same probelm and would be very grateful if you could extend your generosity and let me have a copy of your files?

    Thanks

    Nicole


  • 966

    0

    Posted October 11th, 2002 15:00

    I have a ghost disk that works but it takes 15 hours, or more, to do an image. has any one else had this problem? Any cure besides putting in another NIC card?

    Thanks,

    Rich

     

  • droid256

    73 Posts

    966

    0

    Posted October 11th, 2002 17:00

    An extended download time like you describe is generally caused by a duplex mismatch.  For instance, if the Network switch you are connecting to is hard set to 100 full duplex, and you are leaving the nic driver in Auto, it will not detect the duplex settings correctly and your system will be running in 100 half while the switch is running at 100 full. 

     

    Try editing the protocol.ini on your boot disk and hard set it to 100 full.  I think the setting is speedduplex=3

    Also make sure you are using the newest Intel Dos driver from http://support.dell.com/us/en/filelib/download/index.asp?fileid=r49017

     

    Droid

  • 740

    0

    Posted October 17th, 2002 17:00

    Turned out to be the driver!! I had a driver that was two weeks older. It smokes now!

     

    Thanks!

    Richlefty52