Connecting with Dell 1450 WLAN to WEP 802.11-mixed on Linksys WRT54G
In the past I've had no issue connecting to my router with both my x30 and Iinspiron XPS Gen1 using a WPA pre-shared key.
However, I just picked up a Omnifi DMSI music streaming box and it doesn't support WPA, just 64 or 128 bit WEP.
'Alright, I thought, I'll just change my encryption, no problem, right?'
HA!
So I logged into my router and switched to "128 bits 26 hex digits" WEP on the router and entered a 13-character alpha-numeric passphrase (all-caps).
I apply my settings and, to no surprise of my own, my laptop loses connection. I try to re-connect, switching the info on the WLAN utility to being a shared WEP system and entered the same key as I entered in the linksys utility, in all caps, as before.
No luck. I was assigned an IP address but I had "Limited or no connectivity" according to the utility.
I've since updated the firmware of the router and still no luck. I'm running the latest WLAN card drivers off the Dell support website.
Does it look like I'm missing anything obvious?
Setting up the WPA-PSK before was so easy, I figured WEP couldn't be that bad...guess I was wrong.
Any advice or suggestions would be greatly appreciated ASAP!
From the documentation, the WLAN 1450 looks like it's Broadcom based adapter so it should support 26 character HEX based 128bit WEP keys. Unfortunately, the Passphrase on the Linksys doesn't work that well - I couldn't even get my WRT54G (before there was WPA support) to accept WEP passphrases even with a Linksys card.
See if you can use Windows own client instead and enter the network key manually
I entered the hex string into my laptop and it's connected and also into the Omnifi box, which worked fine once I switched to serving music from Musicmatch, instead of 'simplecenter' the UPnP server bundled with the omnifi box.
ABelton
50 Posts
549
0
Posted March 12th, 2006 01:00
I entered the passphrase...
It's 13 characters and that's how many the Omnifi/Dell WLAN accept for 128 bit WEP.