If you want the utter BEST range, you want the Senao based cards (branded EnGenius in the US). They push 22.5dbm (200mW) and have the best receiver sensitivity on the market.
Comparativly, the Cisco cards have about 100mW, and most linksys cards about 35-50mW. Your 1150 is 30mW.
All of the above are 802.11b cards
As you an see from my sig, I use a Netgear based 802.11g which has an output of 100mW, but there is a similar 200mW card.
Best place to get all of these is http://www.hautespot.net/Products/Catalog.htm. The 802.11b card is 'NL-2511 MP' and the 802.11g card (which support the 108Mbit Atheros spec) is NL-3054 MP Aries. They also have a triband card there.
Message Edited by mattcowger on 03-21-2004 03:40 PM
I checked the NL-3054MP Aries you mentioned above. It is however, a mini PCI IIIA card that I believe would not fit in my I5100 (AFAIK it supports only mini PCI IIIB). Are there any other Atheros-based mini PCI cards that come in mini PCI IIIB form factor?
It took me a bit of work to find one, but here is a triband IIIB card using the 5212 chipset. Its a 18dBm card though, so only about 63mW...not bad but not great:
mattcowger
2582 Posts
158
0
Posted March 21st, 2004 21:00
Comparativly, the Cisco cards have about 100mW, and most linksys cards about 35-50mW. Your 1150 is 30mW.
All of the above are 802.11b cards
As you an see from my sig, I use a Netgear based 802.11g which has an output of 100mW, but there is a similar 200mW card.
Best place to get all of these is http://www.hautespot.net/Products/Catalog.htm. The 802.11b card is 'NL-2511 MP' and the 802.11g card (which support the 108Mbit Atheros spec) is NL-3054 MP Aries. They also have a triband card there.
Message Edited by mattcowger on 03-21-2004 03:40 PM