ezragray

updated

18 years ago

E

ezragray

3 Posts

0

1099

January 23rd, 2009 09:00

Recovery from an incomplete NDMP saveset?

Has anyone here ever recovered anything from an incomplete NDMP saveset?

I'm trying to recover a single file, but I'd recover everything there if need be (185GB).

Multiple permutations of recover return "6526:recover: Ignoring NDMP save set id . Use nsrndmp_recover to recover the save set."

ndmp_recover attempts return: "39077:nsrndmp_recover: error, aborted save set "

scanner -vvvvv -S "rd=filer:nrst0a (NDMP)| uasm -rv -m / =/ seems to run normally but pipes nothing to uasm then asks for another tape (I've confirmed that no part of the ssid was written to another tape).

Is this a waste of time?

Networker 7.4.2 on Solaris 9, btw
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    519

    0

    Posted January 23rd, 2009 23:00

    I don't think uasm works with NDMP stream. That would mean only traditional restores would be possible and it seems to be hardcoded to ignore aborted savesets meaning this is lost game.
  • rmines1

    49 Posts

    519

    1

    Posted February 4th, 2009 15:00

    Recovering from aborted or incomplete savesets is not supported for NDMP. Also uasm is not supported. What customer is attempting to do cannot be done. The saveset is incomplete and therefore cannot be read by the restore utility on the NAS filer as required.
  • rmines1

    49 Posts

    519

    1

    Posted February 4th, 2009 15:00

    Hi Ezra:

    The previous is correct. uasm is not supported for NDMP. Aborted or incomplete savesets are not recoverable. You must keep in mind that the saveset is generated by the native backup utility that is part of the Operating System on the NAS filer. It is not generated in the NetWorker proprietary format. Therefore, features such directives, archiving, etc. are not understood by the native backup/restore utilities that is part of the NAS code.

    Hope that answers your question. Please let me know if you need additional detail.

    Regards,
    Rita Mines
  • satishs

    50 Posts

    519

    0

    Posted February 18th, 2009 12:00

    Has anyone here ever recovered anything from an
    incomplete NDMP saveset?

    I'm trying to recover a single file, but I'd recover
    everything there if need be (185GB).

    Multiple permutations of recover return
    "6526:recover: Ignoring NDMP save set id .
    Use nsrndmp_recover to recover the save set."


    ndmp_recover attempts return:
    "39077:nsrndmp_recover: error, aborted save set
    "


    scanner -vvvvv -S "rd=filer:nrst0a (NDMP)|
    uasm -rv -m / =/
    seems to run
    normally but pipes nothing to uasm then asks for
    another tape (I've confirmed that no part of the ssid
    was written to another tape).

    Is this a waste of time?

    Networker 7.4.2 on Solaris 9, btw


    Most probably a waste of time :-0) , if your filer is Netapp, try this as a last resort.

    restore tf rst0a

    Where rst0a is your tapr drive letter. This will be different
    ----------

    Does the Netapp utility show any files?