Is there any MIB file developed for NetWorker for the SNMP traps?
Hello all,
I need to integrate NetWorker Alerts/Reports with an alerting software and I was wondering if there is any MIB (Management Information Base) files we could look into. As far as I know there were no such files in previous versions of NetWorker, but I was wondering if any of you know if these are now created or NetWorker is still sending just SNMP traps for alerting/monitoring scenarios.
Any further information would be much appreciated.
Usually MIB's are intended for Hardware Monitoring/Alerting, so unfortunately there are not any MIB available for NetWorker.
In our case we eventually went for DPA (EMC Data Protection Advisor) which indeed has some MIB's available, and DPA will monitor both HW and SW, including NetWorker.
DPA has much more monitoring capabilities, such Virtual environments, HW (switches and SAN switches), Storage, Data Domain, EDL, PTL, VTL, etc.
Before putting DPA in place we just created some notifications via e-mail, and then we configured our ticketing tool to receive those emails and translate them into a valid ticket (for example in case of a backup failure).
here is the Article, but it would appear to be specific to CLARiiON and Navisphere, but may give you assistance in creating the MIB you need: -
Question:
How can I enable my CLARiiON array to respond to SNMP inquiries without Navisphere Event Monitor?
Question:
Can I compile a MIB on a SNMP management station to translate traps sent from a CLARiiON array?
Environment:
EMC SW: Navisphere Event Monitor
Environment:
Product: CLARiiON CX Series
Problem:
CLARiiON array does not respond to SNMP inquiries.
Problem:
Using Navisphere Event Monitor to send SNMP traps to SNMP station. A MIB file is required to translate the meaning the trap on the SNMP station.
Fix:
The Fibre Alliance (FA) MIB can be compiled into CA-Unicenter or Tivoli NetView so that these programs can decode traps sent from Navisphere Event Monitor. The latest version of HP OpenView can receive SNMP traps from Event Monitor without having to compile the FA MIB. Once an SNMP trap has been generated, it is up to the management software to receive and interpret the trap. For more information, see the "Managing EMC CLARiiON with SNMP" White Paper on Powerlink for more information on the FA MIB.
You can also install the CLARiiON MIB in the linked Zip file on a CLARiiON storage processor (SP) to enable it to respond to SNMP inquires if you do not have Event Monitor on your management station. Your management software would still require the compiled FA MIB to decode the trap that it receives from the CLARiiON array. Also, included in the Zip file is a document that describes the fields that are currently available for query requests from the CLARiiON implementation of the FA MIB.
Click this link to download the CLARiiON MIB file. Open the Zip file or save it to disk and then extract the CLARiiON MIB.
CarlosRojas
1 Rookie
•
1693 Posts
1786
0
Posted August 27th, 2012 00:00
Hi Thierry,
There are not such MIB's for NetWorker.
Usually MIB's are intended for Hardware Monitoring/Alerting, so unfortunately there are not any MIB available for NetWorker.
In our case we eventually went for DPA (EMC Data Protection Advisor) which indeed has some MIB's available, and DPA will monitor both HW and SW, including NetWorker.
DPA has much more monitoring capabilities, such Virtual environments, HW (switches and SAN switches), Storage, Data Domain, EDL, PTL, VTL, etc.
Before putting DPA in place we just created some notifications via e-mail, and then we configured our ticketing tool to receive those emails and translate them into a valid ticket (for example in case of a backup failure).
Thank you.
Carlos.