U2718Q (3) 0 of them are getting HDMI from 2 different pc's
Hmm. So i have 2 pc's here with 3 monitors in total.
1 pc has a 2080ti the other has a 1080ti.
all 3 monitors are Dell U2718Q.
My main pc is using the hdmi port for VR, so i was considering scooping up some DP1.4 to HDMI2.0b adapters so that I could use HDR. (requirement on these displays for hdr is hdmi)
The cost of them is pretty high especially needing several so i wanted to test out how it looked and if there were any caveats before I pulled the trigger.
Well, first cable to first monitor. No output. second cable to second monitor, no output.
I figured a config thing somewhere so I decided to try with the other pc. Same result, no hdmi cable detected when I restarted the pc.
well reviewed and seem plenty solid. I certainly didnt get 3 bad ones in a row, nor 3 bad hdmi ports on 3 different monitors.
The one time I can get it to show up is if i plug it in while the pc is already running and I have an image ala displayport. Then it pops up as another monitor in NVCP.
However if i restart the pc, it simply says No HDMI cable and the display goes into power saving mode.
I even tried going into the OSD and selecting HDMI manually. Still has no HDMI cable detected.
sorry if i wasnt clear. I dont have an adapter. This is a cable straight from monitor to card.
I'm trying to test the hdr capability before i buy some adapters so i can use DP>HDMI. Not gonna bother if im not keen on the HDR, but i cant even get HDMI to work by itself at the moment. HDR or no HDR
@klepp0906x ah ok, I misread that post. Have you tried applying this firmware update for the display, which lists among its fixes "improved HDR and color tuning, fix HDMI no display issue at 2560 x 1440 with GFX1070 with HDR On"? I realize that that isn't precisely your setup, but it may be worth trying.
If that doesn't resolve it, I don't see anything obvious you've overlooked, and whatever might turn out to be the problem here definitely shouldn't exist. But just to try to narrow the scope of the problem and identify a culprit, the only other things I can think to test would be to:
Use a completely different brand/model of HDMI cable. Even if it wasn't rated for HDMI 2.0 and therefore wouldn't do 4K 60 Hz with HDR, it'd be interesting to see if you can consistently get any image at all beyond that one scenario you described. Although even there you mentioned that you have an image "ala DisplayPort". So that means you haven't gotten HDMI working at all yet, correct?
Try a non-NVIDIA HDMI source device, like a streaming device, DVD player, etc.
As I said, even if either of those tests succeed, I can't imagine why the particular type of HDMI cable you have or an NVIDIA GPU would be a problem, but it would be interesting to see if there's ANY scenario where you can reliably get an image via HDMI.
Hello, got your PM - just havent had a chance to respond to this or that due to RL. Two kids home all the time is chaos lol.
Anyways, i actually have M2B103 firmware on all the displays so thats a no go.
as far as your PM regarding the passive adapter, that would work apart from the fact I have 3 monitors in total, 2 on the pc that also has the VR setup. Thus even if i were able to swap ports allowing a passive adapter, id still have to buy an active anyways.
Of course it would save a few bucks, but probably something to be said for uniformity especially when it comes to things like this (troubleshooting).
Will report back when ive done more testing. wondering if the nvidia drivers are somehow holding onto the DP displaymode, or the fact im leaving the DP cable plugged into the monitor even though its not plugged into the pc at the time has any effect on the issue (unlikely).
jphughan
11 Legend
•
13985 Posts
•
79931 Points
555
0
Posted April 9th, 2020 11:00
@klepp0906x seems like the only constant in that test was the adapter itself, so that would be my prime suspect. Any way you can exchange it?