hellodellpc

updated

11 years ago

H

hellodellpc

1 Rookie

•

3 Posts

0

158255

September 18th, 2015 17:00

P2715Q monitor, won't wake from sleep from power saving

Sorry, I know this is a re-post but I could not reply to those posts. My P2715Q (still in warranty) is not waking up from sleep. I have Dell and HP machines and after either machine goes to sleep and then wake up, the monitor does not wake up. 

Dell: Windows 7, ATI Radeon, HDMI

HP: Windows 10, NVIDIA GTX 745, mDP (also tried with HDMI)

My Dell U2715HM does NOT have this issue (with either machines). All display drivers are up to date. Monitor has been reset to factory state. 

I have tried calling Dell many times and they checked my Dell machine and settings are okay. The issue is very annoying. Any ideas? 

  • 17330

    1

    Posted July 11th, 2017 04:00

    I think I may have a solution, although my setup is different from yours.

    I have 2 P2715Q monitors connected to a 13" 2015 Macbook Pro, and have been struggling with wake from sleep issues with both monitors randomly over the past 18+ months.  The monitors were connected using DP cables (not daisy chained, each monitor connected to it's own port on the MBP), MST off, resolution 3840x2160 60Hz.  I swapped the DP cables out for mDP cables hoping that might fix the issue, no the issue remained after swapping out the cables.  Whenever waking from sleep, only one monitor would wake, to wake the second monitor I would have to power the monitor off and back on.  This would happen multiple times a day, it was routine.  The issue did not always persist to the same monitor though, I would randomly have to power cycle each monitor.

    What finally resolved the issue for me, was to "Reset Energy Settings" on both the monitors.  To do this, open the "Menu" settings on the monitor (click twice on the second button up from the power button).  Then select "Energy" settings and then select "Reset Energy Settings".  If you have dual monitors, do this for each monitor.  

    I performed the above action about 3 weeks ago, and since that time I have not once had to power cycle either monitor, both monitors wake from sleep without any issue.  

    I hope this information will also help to resolve your issue.

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    13460

    0

    Posted September 18th, 2015 21:00

    Dell Technical Support for your region should setup a used exchange for an A03 revision of the display. A used exchange is the only way to get the A03. For your region, the part number they should order is X24K1.


    DELL-Chris M (old account)

    #IWork4Dell

  • hellodellpc

    1 Rookie

    •

    3 Posts

    13460

    0

    Posted September 18th, 2015 21:00

    A00

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    13460

    0

    Posted September 18th, 2015 21:00

    What revision (A00, A01, etc.) is your P2715Q?


    DELL-Chris M (old account)

    #IWork4Dell

  • hellodellpc

    1 Rookie

    •

    3 Posts

    13460

    0

    Posted September 18th, 2015 23:00

    So i reference this thread when calling?

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    13460

    0

    Posted September 19th, 2015 17:00

    Sure. But they should know about it already.


    DELL-Chris M (old account)

    #IWork4Dell

  • LANCORP_88b25e

    2 Intern

    •

    224 Posts

    13460

    0

    Posted December 19th, 2015 13:00

    I have a P2715Q (A00) on a Dell Venue Pro 11 (7139) same issue...won't wake from sleep without removing power and plugging it back in.  Even turning the monitor off then on doesn't work.

    Is there a way to update to A03 ourselves or is A03 a hardware update also?

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    13460

    0

    Posted December 19th, 2015 16:00

    We do not have any mechanism in place to allow customers to flash the firmware on this Dell monitor. This is only done in our service centers on New and returned monitors. The only way to get a different revision is via a used monitor exchange.


    DELL-Chris M (old account)

    #IWork4Dell

  • 13462

    0

    Posted April 29th, 2016 10:00

    Hi! Chris M, the experience calling support has been to say the least painfull. Is there a number where I can talk to people who actually understand the issue ? No one seem to acknowledge the existence of the A03 hardware revision, and mention problems with the cable (? - problem to wake from sleep, not to make the screen work!), or the Nvidia drivers (not even a nvidia graphics card),... 

    Thanks.

  • stratust

    1 Message

    8987

    0

    Posted April 29th, 2016 16:00

    I called Dell customer service twice, and they didn't know about the issue, I tried to request a revision A03 but the Dell representative didn't know how to request a specific revision. A the end he replaced my two p2715q monitor rev A01 by Rev A02. Conclusion: I still have the same problem! Dell support for workstations is great but for monitors is terrible, to say the least.