UNSOLVED

foompa

updated

20 years ago

F

foompa

3 Posts

0

11100

September 28th, 2006 23:00

new 2007wfp screen looks slightly dusty/grainy, won't come clean. Normal?

I ordered a 2007wfp a few days ago, and UPS delivered it yesterday. Everything looked fine, except ...

I slowly started noticing that my screen looked a little grainy, as if tiny, tiny, tiny, tiny bits of dust had somehow gotten all over the display and spread themselves evenly. I tried wiping off a section of it using part of my hand, but no go. Just now, I tried using a soft eyeglass cleaning cloth and distilled water on a section of it. No go.

Is everyone's like this? For me, it's most visible on top of solid white, with my eyes about a foot from the display. (Of course, it's visible at other distances, too--even much farther.) But it's not all that intense. Flat colors just look _slightly_ textured. It's slowly starting to get to me, though. I tried taking pictures of it earlier, in and out of macro mode, but it won't come out. Probably way too much detail to pick up.

I wish I had another LCD around, or a working laptop, to see if this sort of thing is present in other flat panels.

Thoughts? Is this normal? Am I seeing things? I just looked at it really close up (eyes two or three inches away), and it disappears, and only the pixel grid is visible. I'm lost. Is this an illusion of some kind, specific to LCDs?

Message Edited by foompa on 09-28-2006 08:45 PM

  • foompa

    3 Posts

    550

    0

    Posted September 29th, 2006 00:00

    Thanks for the reply.

    Aw, man. So it's normal. There's nothing I can do to minimize the effect? (Blaaargh, I bought this for graphics work.)

    Edit: by the way, is there any way to figure out whether this has a S-IPS panel or if I have one of the newer gimped 2007wfp models with S-PVA panels? Are those out yet?

    Message Edited by foompa on 09-28-2006 09:05 PM

  • gpro

    2 Intern

    •

    2024 Posts

    550

    0

    Posted September 29th, 2006 00:00

    Hi, it sounds like you're describing the anti-glare coating.
  • gpro

    2 Intern

    •

    2024 Posts

    550

    0

    Posted September 29th, 2006 08:00

    The panel information is in the service menu. To access it:

    1. Turn off the monitor, hold 'menu ' and '+' buttons at the same time while turning it on.
    2. After the power is on, let go of the 2 buttons and then press the '-' button.

    LPL WSXGA LM201W01 is the LG.Philips S-IPS panel.
    SAM WSXGA LTM201M1 is the Samsung S-PVA panel.
  • foompa

    3 Posts

    550

    0

    Posted September 29th, 2006 08:00

    S-IPS! Woohoo! Thankee. I probably should've known how to do that, but only read bits and pieces of the manual.
  • gpro

    2 Intern

    •

    2024 Posts

    550

    0

    Posted September 29th, 2006 09:00

  • Cuthalu

    27 Posts

    550

    0

    Posted September 29th, 2006 11:00

    Grainy-problen is the fault of coating, and 2007wfp's coating is grainier than most of the other displays, at least what I've seen.

    After using 2007wfp for 2 weeks I still saw it as clearly as in day one, so I returned it and I'm probably going to wait for SED or something that's clearly better than crt.

    Message Edited by Cuthalu on 09-29-2006 07:55 AM

  • KevinR100

    642 Posts

    550

    0

    Posted September 30th, 2006 09:00

    Did this not strike you (very much) as a refurbished screen????
    Look at some postings recently (especially by all_the_facts) as to this very same thing.
    Can you live with being sold a refurb. ????
    cheers
     
    Edit: If this is truely the coating on the screen - then there are plenty of good ones out there that don't. I have a different breed & I do graphics work & I prefer working on mine then my 21"G Sony crt..

    Message Edited by KevinR100 on 09-30-2006 08:54 PM

  • all the facts

    2 Intern

    •

    983 Posts

    550

    0

    Posted October 1st, 2006 03:00

    My refurb had the word "refurbished" at the very top edge of the model version number label on the shipping box. That was easy to figure out, but easily overlooked, as there are a lot of things you are thinking about at once to check out a LCD you may not be familiar with.

    People, please examine the labeling on the shipping boxes.

    See my mega post also. Use it as a checklist, makes things go faster. Add any ideas you have of your own.

    http://forums.us.dell.com/supportforums/board/message?board.id=dim_monitor&message.id=66009

    Good Day!