UNSOLVED

Ideasbrewing

updated

19 years ago

I

Ideasbrewing

1 Message

0

7970

October 2nd, 2007 23:00

How old of a PC will a new monitor work on??

A silly question perhaps but my 19" CRt monitor has died. I bought my PC in 2002 (it was a skookum system then!) & want to get an LCD flat screen to replace it. A local computer shop inferred that a new screen wouldn't work on my system & I suspect they want to sell me a new computer.
 
What details / info would any of you need to be able to tell me if I can order a new monitor from Dell & have it work?
 
I only know how to use the software. All the rest is mostly a mystery to me.
 
Thanks.
Ideasbrewing
  • gpro

    2 Intern

    •

    2024 Posts

    4896

    0

    Posted October 3rd, 2007 00:00

    It really depends on your graphics card. It would be good to know what model it is. If it only has VGA output check that any LCD you're interested in has VGA input as well as DVI (most do). Up to 19" and possibly 20" LCDs should be compatible with fairly old cards, widescreen compatiblity may be a problem with some cards.
  • w.pasman

    16 Posts

    4896

    0

    Posted October 6th, 2007 06:00

    Sounds like they are selling you nonsense. Almost all LCDs have still analog VGA in. Almost all PCs have VGA out or DVI out. Check the connector on the cable to your computer. If it is has three rows of pins, with 5 pins each, it is a VGA connector. If it has three rows with 8 pins plus a flat tab at the end it is DVI. Odds are 10 to 1 that your 2001 compu has VGA. Just get a LCD with the matching input, so probably you need a VGA input on the LCD. There is 99% chance that any LCD will work *straight away* with your computer, that is just plug it in and it works. Just make sure that the LCD inut matches your current computer video output. It sounds you would be best served with a simple 1024x768 or 1280x1024 resolution LCD. It would be nice if you can check first what resolutions your old compu can handle, 1280x1024 is not that much but some old computers may be unable to do that in which case you'd better get the 1024 sized. I think you should just take the compu to the shop and they should be able to test the capabilities of your compu and offer the matching monitor straight away. If the shop can't do even that simple stuff, go to a better shop.