HI, I received the monitor Rev A03 yesterday and during profiling it has a noticable green/magenta gradation from left to right, most pronounced on the lower right corner. I've already lodged a replacement request but was wondering if this is a known issue with the A03? From the forum it doesn't seem like a common problem like it is for the U2410s so hopefully the replacement will be okay.
My 3008 has a green cast to it, and even after calibration it doesn't look right when I turn it on until it has warmed up for a 1/2 hour or so. A replacement is in production. For this money it needs to be perfect out of the box.
what else do you have on your desktop ...close to or touching the monitor. I have not had this experience with an LCD (never tried actually), but in the past a CRT displayed similar behavior and it turned out to be very sensitive to the speakers I was using - other speakers didn't seem to bother it, and the existing speakers moved at least a foot away seemed ok too...but I got this color gradation with one particualar set when placed close to the monitor
My 3008 has a green cast to it, and even after calibration it doesn't look right when I turn it on until it has warmed up for a 1/2 hour or so. A replacement is in production. For this money it needs to be perfect out of the box.
Exactly - this being the top of the line dell screen I was surprised by this. I got a pair of 2209WA earlier in the year and they were without any problems.
Okay I received a replacement last Friday and it has the same issue if not worse. This should be a newly manufactured one as it took some two weeks for it to be replaced when I called up about it.
I've attached a couple of images to show the severity of the issue, it's really quite noticeable if you do a lot of black and white editing as I do, and find it quite unacceptable (even noticeable on this background of this site..).
Images taken with the camera set on manual with same shutter speed/aperture/manual white balance
The first one - 1. whole screen - 2. top left - 3. bottom right:
full res: http://o-fi.com/3008wfp_1st.jpg
The second one:
full res: http://o-fi.com/3008wfp_2nd.jpg
The test image - made from image for profiling from spyder3pro :
full res: http://o-fi.com/test_bg.jpg
There is no point setting the monitor on any of the preset modes (as is suggested in the u2410 thread) as once you colour calibrate the screen to display neutral grey this physical defect will always be visible.
I'd be grateful if any of the 3008wfp owners out there could use the test pattern above to see if this problem is widespread or not, or is a rev 03 issue? Franky this is quite disappointing..
If you test the display on another desktop or notebook using a full white pattern (not the image produced by spyder3pro), does the color issue still show?
I've tested them on 2 desktops via both Displayport and DVI, and on 1 notebook via vga and the area and degree affected remains the same. The issue is obviously less acute when the screen is all white (@120cd/m2) but it is definitely still visible especially on the lower right corner:
dwette
41 Posts
811
0
Posted November 17th, 2009 18:00
My 3008 has a green cast to it, and even after calibration it doesn't look right when I turn it on until it has warmed up for a 1/2 hour or so. A replacement is in production. For this money it needs to be perfect out of the box.