2407WFP Monitor, and an easy fix to the green ghosting...
Hi,
I just purchased the 2407WFP widescreen monitor from Dell (Rev A03), and I have the dreaded "green ghosting" as most others do. It is particularly bad on white backgrounds such as when scrolling web pages. Anyway, here is an easy fix that worked for me by simply adjusting the colors.
Reduce Red to 95
Reduce Green to 95
Keep Blue the same
Reduce Brightness to 31
Monitor mode is set to Multimedia.
These changes completely eliminated the green ghosting for me, so hopefully it works for you.
That screws up the colour calibration and the colours don't look as good as they do by default. At least on my unit. Also this only reduces the ghosting it slightly. I can still notice white ghosting.
I have very few, if any, of the (apparently DVI-related) issues I've seen posted here. Flame if you want but I'll bet the *easiest* fix would be to use VGA, rather than DVI, if your card has VGA out.
Until about a month ago, I had a video card with both VGA and DVI outputs. I tried the display with both connections and the (much tauted) "advantages" of using DVI versus VGA just never materialized, at least not for me. When I switched over to VGA, the display looked every bit as good as it did with DVI. I mean, it's a least worth a shot if you've got both outputs available and you can easily go back to using DVI if you think VGA is inferior.
bubbaganoush
41 Posts
499
0
Posted March 10th, 2007 18:00