Just received the 2007wfp a few days ago and it gives me a headache after 5 minutes of use. It has A02 already so that's not the problem.
The problem is most apparent on large areas of a single color, such as the dark grey XP often uses for the background workspace of a program. It looks like a flicker, as if the grey is made up of different shades of grey that are moving, left to right or up and down. If you want I can work out the RGB color that is that grey.
Combined with this there is a really weird "crystal" effect which I guess is anti-glare but seems to do my eyes no good.
I've got ClearType on, I'm running at native resolution, I've turned the brightness down to a sensible level (30), I'm running in Desktop Mode (the one A02 fixed) and I've tried both VGA and DVI. None of this helps.
I used to notice a severe flicker in the grey areas (especially in video games) on my 2007WFP. However, this was the A00 model and it was only via VGA. My current model doesn't exhibit any flickering as far as I can see, however it's only connected via DVI, not VGA.
Not sure if that helps, but it kind of sounds like a defect, unless there's some sort of setting that's messed up in your video card...
Ben, I have the same problem (Dell 2007FPW A02) and am getting a refund. I've come to the knowledge that I think the dell anti-glare coating is producing a slight discoloration on top of my entire screen...some call it a crystal effect....and it bothers me, especially when trying to read black text on a white background. You will find that turning brightness down actually increases the crystal effect (makes it easier to see). I really recommend getting a monitor with a clear coating such as NEC opticlear. It's much more CRTish and easier on the eyes, imo. I hope this helps...took me about a week or so to figure out it was the anti-glare coating.
I'm pretty sure all the new Dell monitors have the same coating, but I don't think that is the same as the flicker. I can see the "crystal" coating when I view whites, but it doesn't really bother me, and I don't have flickering.
You might try checking the "phase" using the CheckMon tool. There is a specific test for this that shows a screen of finely spaced grey lines. If your monitor has a phase problem then the lines will look wavy or shimmer significantly.
It says that the "phase" test is not for DVI? Either way, it's almost impossible to look at without feeling dizzy, but that might just be an illusion and not the monitor.
The worst I've seen so far is grey RGB(128,128,128), especially when it takes up the whole screen. This is unfortunate as XP uses it as a background all the time.
The Dell is currently at work so I brought my laptop in and tried it on the VGA, but if anything, it was worse than the DVI of my work computer. This was the case even when I isolated the monitor, putting it on a cleaner power line and plugging it only into my laptop (which was on battery).
XPS_Buddy
167 Posts
480
0
Posted July 26th, 2006 14:00
Not sure if that helps, but it kind of sounds like a defect, unless there's some sort of setting that's messed up in your video card...
Message Edited by XPS Crazy on 07-26-200610:11 AM
Message Edited by XPS Crazy on 07-26-200610:11 AM