UNSOLVED

kwest2

updated

20 years ago

Closed

K

kwest2

123 Posts

0

12015

October 26th, 2006 14:00

X1400 Video Out to TV Questions

Hi All,

Wanting to hook up my E1505 to a 42" Plasma HDTV using the X1400. The TV doesn't have VGA in, so I was thinking I would connect via component.

Can I buy a VGA to Component cable to connect my notebook to the TV? ATI's website says the X1400 can send the signal component out. Anyone with experience?

Thanks all!

Message Edited by kwest2 on 10-26-2006 07:41 PM

  • 402

    0

    Posted October 26th, 2006 20:00

    i recomend you get an s-video cable as it is better than component and the video output is s-video
  • kwest2

    123 Posts

    402

    0

    Posted October 26th, 2006 21:00

    I've read S-Video isn't as good as the other options (VGA & DVI)? Is that incorrect?

    Regardless, will what I suggested work?

    TIA
  • kwest2

    123 Posts

    402

    0

    Posted October 26th, 2006 23:00

    Thanks for the help, Diomsidney.

    I bought the Panasonic TH-42PX60U and will be hooking up my Inspiron E1505 with an X1400 graphics card.

    The ATI site says this graphics card can send Component out. Otherwise, the only port out on the E1505 is VGA. The Panasonic only has S Video, component, DVI and HDMI in. So I was thinking of just buying a VGA to Component cable and telling the X1400 to make the signal component out.

    Am I wrong?

    Thanks again!
  • 402

    0

    Posted October 26th, 2006 23:00

    s-video is simply perfect if you have a 15"inch tv best toshiba and sony.
    and no the other option will not work. best for you is dvi then. and lastly dvi is the best now not counting HDMI of course. pls
    if this is not enough give me your computer specs so i can do some research on cables.
  • 402

    0

    Posted October 27th, 2006 08:00

    great buy buddy. simply perfect screen you got there. and you will have no problem with your output since there is a VGA to DVI output, check at fry's electronics. you will find it very easily there. if not compusa will be your next bet. but fry's has it since i too have one for my nvidia. good luck will work just fine.vga to dvi is great obviously better than s-video and it cost just 18 dollars. good luck buddy.
  • kwest2

    123 Posts

    402

    0

    Posted October 27th, 2006 21:00

    I'm not actually sure if there is a DVI input on the tv. The only 3 I am sure of is S-Video, HDMI and component.

    Still not sure if the X1400 will send a component signal to the TV through an Analog -> Component cable. Anyone know?
  • kwest2

    123 Posts

    402

    0

    Posted October 29th, 2006 14:00

    Anyone else here with experience/advice?

    Thanks
  • taz291819

    2 Posts

    402

    0

    Posted November 3rd, 2006 20:00

    The X1400 uses a svideos-style dongle for component and spdif outputs. You can order the dongle (or adapter) from Dell. I think it costs $30.