UNSOLVED

marenmols

updated

17 years ago

M

marenmols

92 Posts

0

46087

February 5th, 2010 13:00

Studio 1747 / i7-720 and Firewire/Usb connection problems

Hi!

I tried in other threads, but now I´ll put it up here!

I cant get my firewire port connected to my TC Konnekt 48 audio interface - after a reboot it connects fine, but after less than a minute it freezes and then disconnect. Drivers are correct for windows 7 64 bit and other TC Konnekt users don´t have this problem??

Also the Usb ports are very very unstable and do not connect everytime I put devices in... a simple usb stick, only get pc contact every secomd time???

I tried to switch Ieee1394 drivers, from the pre installed to the (legacy) driver.. nothing helps..

All other things - sp far - runs smoothly!

Pls!! Do someone use this notebook for firewire connections - then pls tell me ig its realy works??

 

Best regds Peter

  • marenmols

    92 Posts

    816

    0

    Posted February 6th, 2010 02:00

    :emotion-2:Yes yes happy!!!

    What a day - I just checked the Bios update site - and it was prvious to your reply.. Every firewire problem is solved here!!

     

    Have a splendid day Doktor!!

     

    Best regd Peter

  • marenmols

    92 Posts

    816

    0

    Posted February 7th, 2010 02:00

    Smile off!!!!

    I was hoping - but it was to good to be true! Short after the Bios A06 update, I had the same problem.. Unstable Usb and absolutely unuseable firewire port. But just after the upodate - the firewire ext. audio interface worked for the first time on this laptop - and suddently it was back to the same as befor the update!!

    What is happening in this laptop???

     

    Hi

    Peter

  • marenmols

    92 Posts

    816

    0

    Posted February 7th, 2010 03:00

    Dear Kally!

    Thank you for your reply - I received my 1747 last wednesday and the dvd set with drivers and win 7 is unbroken...My plan is to send the laptop back to Dell monday - I allready had one phonecall with the danish support desk, and she told me that if i had this problem - I should return the item...???

    But - if I open up these dvd sets and reinstall the entire thing!!! Dell would charge me some payments to cover this???

    Still I want to solve the problem... I signed a 4 yrs extended warranty on this... but will Dell solve this?

    Had you heard of any others having this Usb and firewire problems... everybody only focus on the throttling issue...and power issue???

     

    Thanks

    Peter

  • marenmols

    92 Posts

    816

    0

    Posted February 7th, 2010 06:00

    I have the pre-installed windows 7 professional on my 1747...

    Right now I´m at work and can´t get on the internet with my laptop - I´m connected through the company network...

    Maybe you can try to explain - what can be done??

     

    From Peter

  • marenmols

    92 Posts

    816

    0

    Posted February 7th, 2010 09:00

    Hi Kally!

    Re installed everything and pc is back to factory settings. Still same problem with usb and firewire connection.

    Any other ideas???

    Peter

  • marenmols

    92 Posts

    816

    0

    Posted February 10th, 2010 05:00

    Just a question!

    What brand of firewire chipset is installed in the studio 1747?? Is it a LSI or what???

    I called the support - and they want to change nearly evrything in my 1 week old studio 1747??? Motherboard, usb board and card reader board??? Now I have reinstalled all software five times and still the same!!!

     

    Hope I´m the only one with this problem?? Maybe other users do not test their firewire port!!! Reply if your using a sort of firewire equipment!!

     

    Best regds Peter

  • RockinFX

    5 Posts

    816

    0

    Posted March 4th, 2010 09:00

    Well, Dell has been known to change component vendors frequently, but this is what is in my new 1747:

    O2 Micro OZ129

    • Integrated PCI Peripheral Connectivity Hub
    • Integrated 8-in-1 Flash Media and SDIO readers
    • 1-Port IEEE1394a-2000 high speed serial bus
    • Supports MMC, MMCplus, SD memory, and SDIO cards
    • Supports SD memory card with CPRM security
    • Supports Memory Stick™, MS PRO Media, xD-Picture™, and SmartMedia™ Cards
    • Supports all 1394a data rates Including S400
    • 128 LQFP package, lead-free

    I haven't tried it with my M-Audio ProFire 2626 yet, but the machine remaining in my home vs being shipped back to Costco hinges on that test.

  • JohnM42

    37 Posts

    816

    0

    Posted May 14th, 2010 12:00

    Hello marenmols,
    Have you checked compatibility?
    Just an FYI for you.
    It is always best to check with the software manufacturer FIRST. They will tell you if they have tested the product and the version, as well as whether or not it will work with Windows 7.
    Check out the Windows 7 Compatibility site: (There you will find out about hardware and software compatibility.)
    http://www.microsoft.com/windows/compatibility/en-us/default.aspx
    There is a pulldown from which you can choose "hardware" and "software".
    There are also some great articles, instructional videos and such to help with your Windows 7 at our Springboard site:
    http://technet.microsoft.com/en-us/windows/default.aspx
    In any event a lot of the times, Vista drivers will work in lieu of Windows 7 drivers, however, it's not 100%!
    As stated previously, it's best to have the Windows 7 certified drivers installed.
    Microsoft does have an official Windows 7 Support Forum located here http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/ . It is supported by product specialists as well as engineers and support teams. You may want to check the threads available there for additional assistance and support.
    Thanks again,
    John M.
    Microsoft Windows Client Support