UNSOLVED

stmas

updated

20 years ago

Closed

S

stmas

16 Posts

0

20499

January 28th, 2007 19:00

red hat 4 on external HD and how to modify bios to dual boot from external HD and internal on 6400

Inspiron 6400 new laptop
I'm planning to install red hat 4 on external hard drive; 
 how to modify bios to dual boot from external HD and internal XP?
Any issue that might arise?
 
TIA
  • Bay Wolf

    4438 Posts

    817

    0

    Posted January 28th, 2007 19:00

    The BIOS will allow you to boot from the following external devices:
    • USB memory key
    • USB CDROM/DVD
    • USB floppy drive

    That's it.

    If you want to dual boot, you will have to install WinXP and Red Hat on separate partitions on the main hard drive.

     

  • stmas

    16 Posts

    839

    0

    Posted January 28th, 2007 22:00

    well if i have an external USB hard drive ? - what is the difference for bios it is memory key or hard drive?
     
    Can I repartition my wwin xp hard drive to allocate 10G for the Linux?
     
    Thanks.
  • stmas

    16 Posts

    839

    0

    Posted January 28th, 2007 23:00

    Thanks!
    1. do you foresee any possible pitfalls with creating partition on my hard drive and changing bios to dual boot?
    2. what tool you suggest for repartitioning?
  • Bay Wolf

    4438 Posts

    839

    0

    Posted January 28th, 2007 23:00



    stmas wrote:
    well if i have an external USB hard drive ? - what is the difference for bios it is memory key or hard drive?  I can't answer that.  Logic would say that if one worked, the other would too but this is not the case. 
     
    Can I repartition my wwin xp hard drive to allocate 10G for the Linux?  Yes.
     
    Thanks.



  • Bay Wolf

    4438 Posts

    839

    0

    Posted January 29th, 2007 00:00

    If you do not want to reinstall WinXP, you will have to get a program similar to Partition Magic.  There are others out there.
     
    If you put Red Hat and WinXP on the same hard disk in separate partitions, you will not have to do anything in the BIOS.  The boot loader program will handle which operating system loads.
     
     
  • stmas

    16 Posts

    839

    0

    Posted January 29th, 2007 18:00

     
    sounds like repartitioning is the easiest way?
    what file system to put on the partition or leave it raw for Red Hat?
     
    Thanks!
  • Bay Wolf

    4438 Posts

    839

    0

    Posted January 29th, 2007 23:00

    I really have never set up Red Hat so I am not of much help there.  I would suggest posting this in the Linux fourm.
     
  • stmas

    16 Posts

    839

    0

    Posted January 30th, 2007 12:00

    Thanks a lot! You saved me a lot of time as DELL tech support stated that it's possible to dual boot 6400 from the USB external HD.
  • Bay Wolf

    4438 Posts

    839

    0

    Posted January 30th, 2007 22:00

    You are welcome.  I'm glad that I could help you.
     
  • AlxMAX

    168 Posts

    228

    0

    Posted February 9th, 2007 13:00

    You should take into account a swap partition and at least the root partition, "/" , of the system. Allocate about 2 - 3 G for the swap and about 10 G for the root partition. For the partitioning part, just resize the Windows partition and leave enough amount to create the Linux ones. Then, at Linux installation time you can create the swap one, the root one and format them. Ext3 is proposed by default by Red Hat, but you can also use xfs, jfs etc. Note: once you choose the file system format, you can't change it aftewards.