UNSOLVED

Denzelpup

updated

15 years ago

D

Denzelpup

7 Posts

0

8468

June 21st, 2011 08:00

Precision m4300

I am an ex Dell warranty engineer that now works for a Multi vendor support company, I have just replaced a motherboard on a precision M4300 with another 6 of the same waiting to be done. All are out of Warranty. Each replacement board comes out configured as a LAT D830 and i know from my Time with Dell that same motherboards were used in various machines, and that to get the correct BIOS you have to Force the BIOS from a pure DOS environment, and not just a DOS prompt from within windows and then type fro m a command prompt c:\ biosname /forcetype, the bios upgrade starts to load but then says  only trouble it says that I cant do that, i have also tried other switches such as /Forceit  and also /Jabil and every combination of all of these each with the same non working result and error.

So my questions are Can you force Flash a D830 BIOS with a Pecision M4300 or can you only do it the other way ie Precision m4300 to Lat d830?

and if it can be done where am i going wrong?

  • Denzelpup

    7 Posts

    306

    0

    Posted June 21st, 2011 10:00

    I am Delll Certified  and the Dell utility disk only changes the TAG number and not the board type

  • speedstep

    11 Legend

    •

    46969 Posts

    306

    0

    Posted June 21st, 2011 10:00

    Dell Precision M4300 Motherboard GU095 DX779

    Unless you are Dell certified I don't think the information will be available to you.

    There is a Dell Tech only utility to change the service tag and board type.

    The Bios utility checks this and installs accordingly.