UNSOLVED

jkaram7

updated

21 years ago

Closed

J

jkaram7

13 Posts

0

14855

April 23rd, 2006 15:00

"Please press Fn+ F2 to turn on bluetooth" message (Truemobile 350)

Hi I did a bluetooth driver upgrade for Truemobile 350 in an Insprion 6000 as reccomended by Dell Support Tool in my system tray. During the update, the driver installation tells me to press Fn+f2 "turn bluetooth on" at 56%. However, it the card is on. I cannot install the stack for this reason. I have tried everything to fix this. I have

1. Renamed bth.bak and bth.inf in C:Windows\INF FOLDER so windows will not use native support
2. Removed all stacks
3. Checked BIOS for detection (It is detected and blue LED on)
4. Did a Upgrade Windows Installation
5. Replaced the truemobile 350 chip with a different one from dell warranty support
6. Tried System Restore
7. Reseated Card

When I turn on bluetooth the computer displays "found new USB device" , then later on states that "a problem occured during hardware installation." In device manager it shows under other devices "other USB device (with exclammation point). The Dell Resource CD cannot detect that the card is present on the system when I go to install drivers. Futhermore, windows native bluetooth cannot detect the card. Have tried other stacks, IVT Bluesolei with no success.

I have searched the forums here and I can't find anything of help. I am really frusterated. I would appreciate any help. I need my bluetooth.Dell states to reformat the hard drive, something that cannot be done at this moment in this time.

Thanks.

Jay
  • zazzified

    14 Posts

    864

    0

    Posted June 22nd, 2006 02:00

    I wanted to bump this because I have this exact same problem on my Latitude D610 and I've searched the forums for months to no avail. Someone help please!
  • N1EMS

    4 Posts

    864

    0

    Posted April 28th, 2007 23:00

    Greetings all:
     
    I just finished a week or so of troubleshooting on this issue with my laptop.  Tech support was of little help.  Please, make a backup of your registry just in case things go south for you.  I didn't see any firm solutions on this issue, hope this helps out (and I looked high and low).
     
    Before conceding that your PC needs a new Bluetooth, try downloading BlueSoleil.  This is a fairly robust Bluetooth driver/software.  It will start up as unregistered, but it will at least get the Bluetooth up and running with a 5mb limit on transfer.
     
    http://support.microsoft.com/kb/883258  is of some help.  For me, the following was a good clue to this issue.
     
    If you know the module is working, open up your regedit and search for this key.
     
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{e0cbf06c-cd8b-4647-bb8a-263b43f0f974}
     
    Delete this key, per Microsoft's instructions.  Then move up and down the keys in this class section only, remove any that contain Bluetooth.  I found at least 3 other Bluetooth instances here, of which at least one was causing the issue.
     
    Once this has been removed, the driver updates/flash sequences will work without the fn+f2 error.
  • zazzified

    14 Posts

    864

    0

    Posted May 10th, 2007 04:00

    Wow I can't believe there's a new response in here. A year later and I STILL have the problem. I did what that all said, and then when I uninstalled the device, it doesn't locate it again. When I go to do the Dell Bluetooth Stack setup thing, I still get the Fn + F2 thing. I can't find a way to add the device back, etc. I'm at a total loss.
  • N1EMS

    4 Posts

    864

    0

    Posted May 10th, 2007 22:00

    Only thing I can think of, is there are still some registry keys that need to be blown out.
  • jkaram7

    13 Posts

    864

    0

    Posted May 10th, 2007 23:00

    The only thing that worked for me was a combo of warranty replacement from dell on the bluetooth chip and a fresh install of windows.  That is, I deleted the partion, and started fresh.
     
     
  • N1EMS

    4 Posts

    864

    0

    Posted May 10th, 2007 23:00

    if you are in doubt if the module works or not, install the BlueSoliel software... if the bluetooth works with that... there are drivers that are still registered.  If it doesn't work... Give Dell a jingle.
     
    I found 3 or 4 instances of a bluetooth driver installed in above and below that key... it's worth checking out.
  • zazzified

    14 Posts

    864

    0

    Posted July 13th, 2007 19:00

    I give up. I did all this stuff with BlueSoleil that I found online, and nothing worked. A Dell tech just came out because luckily I have the full on site warranty, and he replaced the chip entirely. Went to run the setup, and it won't complete. Said to use Fn + F2 to turn it on, and now it's hung up at 56%. Not frozen...just not progressing. The tech said that if it never works, Dell might want to try replacing the motherboard. Now, at least the Bluetooth light is on and staying on, but I seem to be effed as far as getting it to actually do anything... Message Edited by zazzified on 07-13-2007 03:54 PM

    Message Edited by zazzified on 07-13-2007 03:54 PM
  • gsomeone

    1 Message

    864

    0

    Posted July 14th, 2007 09:00

    hi friends.....just today i have the same problem with the bluetooth....:smileysad:
     
    i do everything that dell says but ( black hole)...nothing...the led and the device won't work...