
UNSOLVED
Need help on upgrading HD in Dell Inspiron 6000
Normal 0 false false false MicrosoftInternetExplorer4
Hello Dell Community Users:
I need help in my predicament.
This is my situation:
I wanted to upgrade my Inspiron6000 with original 60GB Hitachi HT54106069A700 to a Western Digital Scorpio Blue 250GB 2.5” PATA 5400RPM 8MB BULK.
I have used the same trick that I read on the internet, that is to zero out LBA-3 so that the hard drive capacity will not be
truncated and then started the cloning process.
Unfortunately I have problem during cloning stage, the error message is “Disk not found”.
I have tried two separate cloning software, APRICORN EZ UPGRADE Universal and also Acronis True Image Home 2009
(Trial Version) but the error message was the same “Disk not found”.
I need help!!! Does anybody have a clue what is the problem? I did not format the new HD before the cloning because according to the software instruction, I do not have to because the cloning will automatically do it.
Any help is very much appreciated!!!
Thank you.
Chee
Responses (4)
Solutions (0)
Two issues:
First, the system BIOS will see only a 137 GByte drive because it does not support LBA48.
The other issue is with Media Direct, which means you cannot directly clone the drive:
http://www.goodells.net/dellrestore/mediadirect.htm
Normal 0 false false false MicrosoftInternetExplorer4
Hello Dell Community Users:
Thank you for all your inputs. I have successfully upgraded my Dell Inspiron 6000 HD to 250GB :emotion-1:!!!!
I would like to share my experience with you all.
There is a lot of existing problems with Dell laptops that have Media Direct stored in HPA(Host Protected Area). You can read about Media Direct in the below website:
http://www.goodells.net/dellrestore/mediadirect.htm
There is an easy way around this problem if you do not care about Media Direct so much. Or if you are not sure whether you have Media Direct stored in HPA.
The way I did after lot of searches on the internet to learn from others:
(1) Download Roadkil's Sector Editor from: http://www.roadkil.net/diskutils.html
(2) Double click sectedit.exe, In the Select Disk box choose Physical 0 and click Open. (DON’T choose any of the drive letters). Use the arrows at the bottom right to find LBA-3. If LBA-3 contains data means you will have problem in the cloning process.
(3) To get around this problem is to zero LBA-3 out.
(4) Click Edit, Zero Data. Now you should see all zeroes. Click File, Save Sector. Close Roadkil. Double click sectedit.exe again and confirm that LBA-3 has been zeroed.
***Actually FYI: my Dell Inspiron 6000’s LBA-3 contains zeros. But anyway, it is good to confirm so that there will be no problem after the cloning process. The existing problem regarding LBA-3 is that the new hard drive's capacity will be truncated to the size of the original hard drive if you do not zero out LBA-3.
Once the above is done. I was ready to clone my hard drive. I bought APRICORN EZ UPGRADE Universal kit that came with the USB cable, case and software. I also have to buy the extra AC adapter which cost me a total of about $55 dollars. If I have to do it all over again, I would not buy APRICORN EZ UPGRADE Universal kit because their documentation is pretty bad. I actually ended up using the software Acronis True Image Home 2009 (Trial Version) that I downloaded from the below website for free: http://www.techpowerup.com/downloads/414/mirrors.php
You can easily buy the IDE/PATA Enclosure that come with the USB cable from anywhere that cost about $9 and above:
And you use the free download software Acronis True Image Home 2009.
The documentation for this Acronis True Image Home 2009 (Trial Version) is very good and you can download it from:
http://www.acronis.com/homecomputing/download/docs/
Cloning Procedure:
(1) I placed my new HD in the IDE/PATA Enclosure that came with APRICORN EZ UPGRADE Universal kit and attached the USB cable to my laptop and also I used the AC adapter for the enclosure. In addition, I make sure my laptop’s power setting is Never turnoff monitor, Never Standby Never Hibernate because I do not want to mess up in the middle of the cloning process.
(2) Oh, I forgot, actually you do not have to format your new blank HD but you do need to initialize it. I went to Control Panel/Performance Maintenance/Administrative Tools/Computer Management/Disk Management/. In the Disk Management window, my laptop can see my new HD, but it also stated that the new HD is not initialize so I click on the disk and right click and select initialize. The new HD becomes “online” but “unallocated”.
(3) Before running Acronis True Image Home 2009 (read Chapter 13 for detailed information regarding Automatic cloning), it is a recommended method.
Then I ran the Acronis True Image Home 2009 (Trial Version). This is where my problem came in
when it needed to reboot, and cannot find the disk after the reboot. I was very annoyed at that
time, it was 2:34a.m. by then!!!! By then I was desperate and decided to pray for help!
(4) After I prayed, guess what, it dawned on me that after the reboot, my new HD is not seen by my laptop, just as like my mouse and my keyboard cannot be seen by my laptop. I usually have to pull them off and plug them back in then the laptop can see it. Knowing the problem. This time when I reran the cloning software, I waited till the software rebooted and about to start analyzing the partition I quickly plugged my new HD in. It worked !!! It could see the new HD and started to clone my new HD. Praise the LORD!!!
(5) After the cloning process is done, I was instructed to hit any key to turn off the laptop. By then it was 4:00a.m. I was dead tired! But it is done!!
(6) This morning, I took my old drive out and installed my New cloned HD in my laptop and it booted up without any problem!!
(7) It was a good experience!!

magedam
183 Posts
630
0
Posted May 25th, 2009 00:00
Format the new hard drive .