UNSOLVED

LarryJB

updated

14 years ago

Closed

L

LarryJB

8 Posts

0

8832

October 5th, 2007 13:00

Memory upgrade on Inspiron 1100 Do I need to upgrade the BIOS too?

I have searched this forum for 2 days now and have learned quite a bit about BIOS upgrading. I have learned that I need to upgrade to A22 before upgrading to the latest BIOS. I have also learned that A31 is probably better than A32 due to an issue with the fan introduced in A32. I also have learned that it can be risky business to upgrade the BIOS and I should upgrade only if there is a specific reason to upgrade. Which brings me to my specific question. I have ordered a 512meg module of DDR PC2700 memory from Crucial that is supposed to be compatible with my computer. It says on their website that I should upgrade to the latest BIOS version before installing the new memory. Do I really need to do this in order to get the best performance out of my computer? My configuration: Inspiron 1100 BIOS ver A06 256M (2 128M modules) 30GB hard drive Windows XP pro SP2 with all the latest critical updates Thanks for your time! Larry Browning
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    149

    0

    Posted October 6th, 2007 00:00

    You do indeed, as PC2700 won't work with the older BIOS releases.
  • LarryJB

    8 Posts

    149

    0

    Posted October 6th, 2007 01:00

    Thanks for the reply. I had already decided to do the upgrade. In fact I just finished about 15 minutes ago! I am proud say I am now the owner of a dell Inspiron 1100 with the bios at A31! It was rather painless actually. I don't know what I was so worried about!
  • Razzoo2

    5 Posts

    149

    0

    Posted February 9th, 2013 18:00

    Thanks.  Tried an A32 flash, which failed.  Tried an A31 flash off a thumb drive. That failed. Removed the thumb drive and wifi usb device, put A31 on the desktop, and it seems to have worked.  I am not sure if the USB devices were the problem or not, but ...maybe part of it.   Now having problem it will not finish boot with the new 512MB 2700 cards in place.  Removed the B card, and rebooted successfully, but got message "invalid configuration into, please run setup F2"  Did that, changing nothing, did reboot, and it worked on one card.  Turned off, added second card, boot screen looks funny and seems to lock up and not finish.  Put second card alone in A slot, would not boot.  I think I have a bad memory card problem.  Yes.  I put the old 128 in slot B and got 640 MB to clean boot. Definitely 1 bad card. But much faster!!!

    Lots of hassle to finally get it right.  One undocumented surprise is having to run the F2 and setup with the first run after the RAM changes.  Seems like the system could do that.