UNSOLVED

falubi

updated

19 years ago

Closed

F

falubi

1 Rookie

•

6 Posts

0

21864

June 26th, 2007 18:00

Latitude graphics

Hi - I have two latitude laptops a D600 and a D630.
Question 1 - how can I tell what the different display resolutions are that each one supports?
Question 2 - for the D600, if it doesn't support a high enough resolution, is there a way to upgrade the video card?
 
Thanks!
Philip
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    260

    0

    Posted June 26th, 2007 19:00

    Are you asking about the screen resolution, or the video chip's capabilities?

    The screen resolution on both models will limit your internal display to the maximum supported- not the video chip.

    In neither system can the video chip be upgraded.

    You can find the exact resolution of your screen in the BIOS setup (it'll tell you whether it's XGA/WXGA or SXGA/WSXGA).
  • falubi

    1 Rookie

    •

    6 Posts

    260

    0

    Posted June 27th, 2007 01:00

    So is the max resolution that the D600 can support 1280x1024? I have it hooked up to an external LCD display that can support much higher resolution, but 1280x1024 is the highest option I'm getting...
    Philip
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    260

    0

    Posted June 27th, 2007 10:00

    It is as high as that model was offered with, yes. The base screen is XGA (1024X768); the optional one, which is the one you must have, 1280X1024 (SXGA). There was nothing of higher resolution offered on this model.
  • falubi

    1 Rookie

    •

    6 Posts

    260

    0

    Posted June 27th, 2007 14:00

    Ok, thanks!
     
  • Bloggins

    3 Posts

    260

    0

    Posted June 28th, 2007 20:00

    Please can somebody tell me: 1) With a relatively large amount of RAM (say, 2 GB) will the graphics card on a Latitude D600 "borrow" memory from the RAM when required? If so, does it do this automatically or can you set it up to do so? 2)Is it at all possible to upgrade Latitude D600 graphics by inserting a PCMCIA graphics cardbus in the relevant slot to improve performance? The reason for these questions is I am thinking of installing Vista and want enough graphics RAM to run the 'Aero' facility. Thankyou vey much.
  • Bloggins

    3 Posts

    260

    0

    Posted June 28th, 2007 20:00

    Please can somebody tell me: 1) With a relatively large amount of RAM (say, 2 GB) will the graphics card on a Latitude D600 "borrow" memory from the RAM when required? If so, does it do this automatically or can you set it up to do so? 2)Is it at all possible to upgrade Latitude D600 graphics by inserting a PCMCIA graphics cardbus in the relevant slot to improve performance? The reason for these questions is I am thinking of installing Vista and want enough graphics RAM to run the 'Aero' facility. Thankyou vey much.
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    260

    0

    Posted June 28th, 2007 21:00

    No, it won't - the memory is fixed at either 32M or 64M depending on what you opted for when you bought the system.

    The D600 will not run Aero.
  • Bloggins

    3 Posts

    260

    0

    Posted June 29th, 2007 22:00

    32 MB- Thanks.