
UNSOLVED
Closed
Latitude D600 touchpad locks after standby
Hi,
I have a Latitude D600 running Windows XP SP1 and the latest Alps Touchpad drivers (A05) from the Dell website.
Whenever I resume the laptop from standby, the entire touchpad, pointing stick and all the buttons are locked up.
Sometimes they unlock (after a few minutes) but recently they have been staying permanently locked. I have found a way around this, which is to use the keyboard to put the computer into hibernation and then resume it. This sometimes cures the problem, although they do remain locked for a while after it has resumed. If this fails, then shutting down and restarting works.
Also, the touchpad seems a bit slow to react, making the movement of the cursor rather sluggish. I have seen this same problem on a Latitude D500, but the Inspiron 500m (with an Alps touchpad) has much better tracking, so it is probably due to the Latitude D Series touchpad hardware.
Any help with these problems would be much appreciated.
Thanks!
Edit: The 500m has an Alps, not a Synaptics pad. And the tracking isn't perfect
Message Edited by isc on 06-03-2004 11:57 AM
Responses (186)
Solutions (0)
Anime Zone
3 Posts
1773
0
Posted December 17th, 2003 16:00
Hmph, pretty tricky. You can try installing Dell Notebook Software to see if it fixes the problem or not. If it doesnt work, well it looks like we have to call Tech Support to address this issue and wait for a new patch or driver to fix this issue (HW is ok.... driver can be pretty tricky at times)Thanks for all the replies!!
I've tried updating to the latest touchpad drivers, but this only succeded in removing the back/forward gesture functions when in web browsers/windows. Incredibly irritating, as I now have to press backspace key to go back a webpage instead of simply gliding my finger from right to left, across the top of the touchpad!!!
Dell, please recognise the issue noted in the above statement!!
This seems to be a bug in the Alps touchpad A05 driver, and I would much appreciate it if it was fixed in the next release.
The drivers for the Inspiron 500m also seem to be affected.
Thanks in advance, Dell.
By the way, could someone please explain to me why the touchpad on the Inspiron 5100 and 500m is sooooo much better than the touchpad on my Latitude D600?? I thought the touchpad on a Latitude (particularly one in the D series) would be equal to or better than the Inspiron touchpads. The Inspiron touchpads are quick to respond and have litle/no lag. My D600 touchpad has large lag, which makes it very difficult to control the cursor.
Could this be a software issue, or are the D600 touchpads just not up to the job? I've matched the settings on my D600 with the settings on an Inspiron 500m (which also has an Alps touchad) and this has made no difference. Bearing this in mind, I reckon the D600 touchpad is just inferior to the Inspiron 500m's touchpad.
Any comments on this would be appreciated.Many Thanks.
Anime Zone
3 Posts
1773
0
Posted December 21st, 2003 15:00
O.K. I decided to make the test with this standby problem and found that the problem can be partially corrected applying the Dell Notebook System Software. I said partially because it will take 10 to 15 minutes to get the touchpad to respond. As I can say, this seems to be a problem in the driver of the ALPs touchpad driver and how it handles the recovery after standby mode in Windows XP. Hoping for a solution here too.Anime Zone
3 Posts
1809
0
Posted December 21st, 2003 17:00
Reinstalling the operating system is not going to help you (it's like killing a mosquito with a grenade) But go ahead and install the Dell Notebook Software file and it will fix partially the problem.- Hopefully this will be fixed, with time.
Another issue I've noticed with my touchpad, is that it sometimes just stops working, or works intermittently. At this point, the touch stick works OK. After about 5 seconds, it seems to correct itself, though.
I must say, I've never seen this kind of erratic behaviour in a touchpad system ever before.

wsz2
4 Posts
1773
0
Posted November 28th, 2003 14:00