UNSOLVED

ReWeN

updated

23 years ago

Closed

R

ReWeN

131 Posts

0

63930

November 25th, 2003 03:00

Latest NVIDIA drivers modified for mobile GPUs - Download here

Well I got really bored so I got off my @$$ and put together the latest modded INF file from http://homepages.paradise.net.nz/ohau-estate/mobilegpuindex.htm with nvidia's original 53.03 driver release, just to make it easy for people to upgrade to these new drivers. If you're wondering why you wouldn't just go to www.nvidia.com to get the latest, it's because they don't support mobile OEM GPUs (therefore their drivers don't install, they just go back to the old ones after you reboot). Anywho, just uninstall your old drivers, reboot, and install the new ones.
 
EDIT: Too many problems with 53.03, so here's 52.16 which work much better:
 
I've tested them myself (see my system spex below) and so far so good! Remember, neither I, Dell, nor NVIDIA can be held responsible for any negative effect that may be caused to you or your computer. If you have any problems then check out http://www.geocities.com/madtoast/  where you can do the good ole' manual INF install incase there becomes a newer INF or something, or if you want other driver releases. There are also support forums there.
 
I hope I'm not breaking any rules by posting this, but Dell is just too slow to do it so we have to resort to other talented people to do it for them. And if you're wondering where I fit in, I'm just the middleman who got bored, packed the modified INF file with the official drivers, and posted them somewhere for all to download.

Message Edited by ReWeN on 12-02-2003 07:41 PM

  • ftsig

    1 Rookie

    •

    61 Posts

    1015

    0

    Posted November 25th, 2003 10:00

    Forgive my asking ( i am new to this), buy why can't someone just use the drivers on nvidia's website ?

    I looked at the website link you have and one posted in response to a question I had yeserday... it just seems a bit too complicated and time consuming.

    I did update my nvidia drivers to the ones from dell using NXP4584.EXE. All I did was execute the file and the drivers got updated.

     

    Any one know if NXP4584.EXE corresponds to the drivers posted on nvidia's site ?

  • ftsig

    1 Rookie

    •

    61 Posts

    1025

    0

    Posted November 25th, 2003 11:00

    oops.... i reread yuour post.... and found the answer to my nvidia driver question. sorry.
  • ReWeN

    131 Posts

    1025

    0

    Posted November 25th, 2003 16:00

    You don't need to go to that site for anything, the point of the file I linked is that it's basically one click like the official ones...

  • ReWeN

    131 Posts

    1025

    0

    Posted November 27th, 2003 22:00

    More info:
    nVidia does not support all oem cards (ie. dell's mobile cards). Therefore when you install their drivers from www.nvidia.com, nothing happens. They will install, but after rebooting the old version is still loaded. That's why a 'modified INF' is needed. An INF file is one of the driver files. nVidia's INF file doesn't include support for our OEM cards, so someone (in this case a guy called Pieter) has edited this file using information from Dells drivers, and made it compatible with our OEM cards. The point of the file linked in my first post is so that you don't have to download nVidias drivers and then muck around to get the modified INF file to work with it. It's all done for you.
    Also I'm not sure that this version is officially out on nVidia's site. I got them from guru3d.com which has always had nVidia's drivers out for download before nVidia officially released them.
    The only bug I've experienced thus far is that when the screen is supposed to turn off (after the screensaver or when you close the lid) it does not and some funky (but cool) image is blurred across the screen.
    If you don't trust the file then don't use it. Apparently over 100 people have downloaded it (and I've only linked to it from this post and one other on the dell forums). I haven't seen anyone post anything bad about it.
    Just FYI, there's a support forum specifically for these types of drivers at http://members.lycos.co.uk/teraphy/forum/

    Message Edited by ReWeN on 11-27-2003 07:46 PM

  • Andrew WOT

    194 Posts

    1025

    0

    Posted November 29th, 2003 16:00

    Another problem with 53.03 is that screen does not turn back on when exiting suspend mode. Sticking with official 52.16.
  • Catarrhine

    78 Posts

    1025

    0

    Posted November 29th, 2003 16:00

    Thanks; works like a charm!

    Inspiron 5150
    BIOS A26
    3.06GHz Mobile P4
    Travelstar 7K60
    1GB PC2700 DDR RAM
    DVD/CDRW
    64MB nVidia GeForce FX 5200 Go
    UXGA Display
    WinXP Home

  • ReWeN

    131 Posts

    1025

    0

    Posted November 29th, 2003 22:00

    Yep I just found that problem also. Waiting on a new INF from teraphy or pieter :)
  • ReWeN

    131 Posts

    1025

    0

    Posted December 2nd, 2003 22:00

    Until the problems with his 53.03 INF are fixed, you can try 52.16 (the link is up in my first post).
     
    The screen shuts off just fine in this one, and TV out works
  • flamebot

    16 Posts

    1025

    0

    Posted December 3rd, 2003 03:00

    I tried the 45.91 on my Inspiron 2650 and they work great. Much faster and snapper than anything Dell has available. They even fix corruption on Nero 6.x SmartStart menu. I also have a frequent problem where my start menu opens and closes extremely and annoyingly slow and I have to hit Fn+F8 to fix it. These drivers seem to cure that problem so far. Oh and suspend and hibernate work fine running Windows XP SP-1 and all the latest critical patches.

    Thanks a bunch!

    I think I will try a newer driver for the fun of it.

     

    Message Edited by flamebot on 12-02-2003 11:40 PM

  • flamebot

    16 Posts

    936

    0

    Posted December 3rd, 2003 04:00

    52.16 works great too! Both drivers much snapper than the Dell drivers and everything works fine. Unreal Tournament runs full screen and with no problems. PTC Pro Desktop Express seems to work ok.

    Message Edited by flamebot on 12-03-2003 12:29 AM