UNSOLVED

Roaf

updated

21 years ago

Closed

R

Roaf

2 Posts

0

19224

April 4th, 2006 13:00

IRQ and M-Audio firewire

I am having problems with my audio recording. The hardware maker (M-Audio) says it is a problem with the IRQ settings, i.e., the FireWire and graphics card are using the same IRQ (11). Can I change these settings or are they fixed?

Thanks!

Roaf

p.s., if it helps here are my IRQ settings...

IRQ 0 System timer OK
IRQ 1 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 2 System board OK
IRQ 5 Dell Wireless WLAN 1450 Dual Band WLAN Mini-PCI Card OK
IRQ 5 SigmaTel C-Major Audio OK
IRQ 5 BCM V.92 56K Modem OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 11 NVIDIA GeForce FX Go5200 OK
IRQ 11 Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 OK
IRQ 11 Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 OK
IRQ 11 Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 OK
IRQ 11 Intel(r) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD OK
IRQ 11 Broadcom 440x 10/100 Integrated Controller OK
IRQ 11 Texas Instruments PCI-4510 CardBus Controller OK
IRQ 11 Texas Instruments OHCI Compliant IEEE 1394 Host Controller OK
IRQ 12 PS/2 Compatible Mouse OK
IRQ 13 Numeric data processor OK
IRQ 14 Primary IDE Channel OK
IRQ 15 Secondary IDE Channel OK
  • Jim Coates

    6 Operator

    •

    13582 Posts

    775

    0

    Posted April 5th, 2006 11:00

    Roaf,

    Use the search utility at the bottom, 'search this board' and use terms like irq or firewire.

    Many have found that they need a different Texas Instruments firewire controller than the Dell one to make maudio work.

    The IRQ assignments cannot be changed in the normal way. I'll paste in a post that suggested a way but I couldn't get it to work:


    IF you want change your IRQ´s try to change the Computer button in device-manager.
    In XP there is an ACPI-PC driver, change to normal PC.
    After reboot XP found some new Hardware and you can configure your IRQ´s manuel
    (posted by Necromancer)


    Jim
  • zeme

    11 Posts

    775

    0

    Posted April 13th, 2007 22:00

    Nice try. Too bad it doesn't work for multicore PC's.. any other bright ideas?
  • Jim Coates

    6 Operator

    •

    13582 Posts

    775

    0

    Posted April 14th, 2007 11:00

    No, except that if I ever get another computer for audio work it won't be a laptop.

    Jim
  • WoldoW1

    12 Posts

    775

    0

    Posted May 21st, 2007 22:00

    Don´t bother. It is not an IRQ problem. You need another computer
  • 782

    0

    Posted July 10th, 2007 12:00

    What do you mean WoldoW1 ? Isn't any solution to this issue? I recognize I have exactly the same problem... thanks
  • WoldoW1

    12 Posts

    782

    0

    Posted July 10th, 2007 16:00

    Well, actually, I have spent few months to figure this out, and my first answer would be no. I have similar problem. After recording 10-60 seconds in pro tools, I have sound oscillation in the soundcard. The reason why I say that it's not an IRQ problem, is that on a laptop running Windows XP, you can't manage IRQ manually. But you can disable conflicting devices. In my case, it did not work. Digidesign has reported that Pro Tools returns unresolvable error when using Ricoh chipset, which my Dell Inspiron 6400 has. Next step would be to try external 1394 controller, but my computer has express card slot, and when I ask for it at computershops I always get the same question " Why in the world would you need that, and, no, we do not have it avaliable". I have heard rumors that using pcmcia 1394 controllers (TI chipset prefered) has fixed the problem, but I haven't tried it myself. If anyone could confirm this, I would be glad. BTW, ask if you can return the card if it doesn't work, because I finally got some PC labs card, that did not work well overall. I contacted Dell support, and they really tried to find some solutions, but it was mainly something that I had already tried. How ever, just now I recalled that somwhere on the internet, I saw forum where some guys had figured that out that disabling the cd-rom fixed the problem (did not work in my case, but hey, you can try it out)
     Good luck and keep us posted
  • 782

    0

    Posted July 10th, 2007 17:00

    Thank you for your clear answer. I have the same sound card behaviour on Ableton Live 6. Thus, every time the sound acquisition (guitar) gets stucked and I hear that digital noise-like sound (actually it reminds me a sawtooth) I click the CPU button on Aleton to make the sound card get working again. I believe we followed more or less the same steps, that are: 1)disabling all the unnecessary devices (CD, DVD, wireless card,...). I red the 40 pages forum thread, one of the most puzzling experience of my life 2)check IRQ (though i am really naif when it comes to these things) 3)hope an external expresscard could substitute the native firewire (i am not sure i have a RICOH chipset, that everybody blames to be the problem) Unforunately the expresscard i found is quite expensive TI chipset(59 euros) and the shop is not going to let me try the card and return it back if it doesn't fix the issue (italian shops...;-) I would be very happy to hear that the expresscard is what we need and just buy it. Keep me updated, i will do the same.
  • Panarea

    10 Posts

    782

    0

    Posted July 12th, 2007 18:00

    I have the Delta1010LT (not firewire) and also have the IRQ problem.
     
    M-Audio's response is:

    We understand your frustration.
    IRQ conflicts ar a pain, but the card does work, it's the system that is having the problem.
    We recommend reformatting without the card in the system.
     
     
     
     
    How will that change anything?  I don't know...
     
    What I'd like to know is... IS THIS A PROBLEM THAT THE SYSTEM IS HAVING? 
     
    or
     
    Is this a problem M-Audio is not disclosing when they advertise that their cards work with XP, when XP documentation itself obviously states that any devices connected to the system HAVE TO BE ABLE to share IRQ's...M-Audio firewire card's are unable to share IRQ's
  • WoldoW1

    12 Posts

    782

    0

    Posted July 13th, 2007 11:00

    Hold on there Panarea........Delta 1010 is a PCI card (I have one of those and I love it), so you are using desktop computer. That is totally different. There you can manage IRQs manually, so check out mr. microsoft web site for further informations. Funny, coz I have never had a problem with my card. Check out digidesign web site and see if your mainboard or chipset has known incompatability to Pro Tools or something like that. On the other hand, I can agree to M-audio dudes, sometimes formatting can help. Also, if you go for clean install, check your motherboard configuration, see if it has the same IRQ taken as the Delta card. But I can confirm that thease card are supposed to work, so keep on trying
  • Panarea

    10 Posts

    298

    0

    Posted July 13th, 2007 15:00

    You can't manage IRQ's manually...
     
     
    No option is available to change the IRQ setting. Windows takes advantage of the ACPI features of the motherboard, including advanced PCI sharing. The PCI bus uses IRQ 9 for IRQ steering. With this feature, you can add more devices without IRQ conflicts.

    Windows XP cannot rebalance resources in the same way that Microsoft Windows 98 does. After PCI resources are set, they generally cannot be changed. If you change to an incorrect IRQ setting or I/O range for the bus that a device is on, Windows XP cannot compensate by rebalancing the resource that was assigned to that bus.
    I can FORCE HAL while reinstalling XP...but then a whole other bunch of issues arise.
     
    :(