UNSOLVED

Jjpeters18

updated

20 years ago

Closed

J

Jjpeters18

49 Posts

0

7370

December 18th, 2006 12:00

Inspirion 610 Problems

I am having 2 major issues with a Inspirion 610 laptop.

The first one that popped up and caught my attention is when docked on its port replicator/docking station (connects through the d/link under the computer), the laptop tends to not recognize that it has a network adapter. It won't error message it, it just gives me media disconnected when I do an ipconfig. Now the funny thing about this is device manager still shows the NIC as fine and good, tried disabling it, enabling it, same results. As soon as I pull it off the docking station, works like a champ.

First thought remove the hardware profile for the docking station... Same thing. Ugh, uninstall the NIC to reinstall, scan for hardware changes... NIC gone, undock reinstall no problems.

Now a new issue has been created, when you power on the laptop either docked OR undocked I get a series of 5-6 clicks, while clicking the LED's (numlock/power) are lit up and good, clicks stop and its like I never touched the pc. Now the clicks are fast enough the laptop doesn't even get to POST before shutting itself back down. This problem is a flip a coin issue, some days I am allowed to boot immediately, some days it will take 10-15 trys. Ran Hardware diagnostics...

0F00:136C
IDEdevice failed blank media or no media present

Any ideas are greatly appreciated. Format/Reinstall is unfortunately not an option just quite yet.
  • BigBrother

    2 Intern

    •

    4801 Posts

    86

    0

    Posted December 19th, 2006 01:00

    Jjpeters18,
     
    Your first act should be to back up all of the important data on your system to CD or another external device.  The clicking symptom would seem to be more worrysome than the NIC issue when docked.  It could be a warning that your hard disk drive is failing.  The error message that you receive when running diagnostics only means that the CD drive failed to read anything during diagnostic tests.  In many cases, there needs to be a formatted CD-RW disk in the drive in order for the drive to pass diagnostics -- especially read/write diagnostics. 
     
    Run extended diagnostics on your system hard drive and reply back here with the results.
     
    Steve
  • Jjpeters18

    49 Posts

    86

    0

    Posted December 19th, 2006 11:00

    I'm sorry I should have posted that I did expect that error code when running diagnostics, since it had no cd drive plugged into it when I ran the diagnostics. All the important user data is stored on a network drive, but I have also tried multiple HD's on this laptop with the same clicks. I finally got dell's support to give the notes from one tech to the next and they are sending me a new Mobo for the laptop. Thank you for your assistance.
  • BigBrother

    2 Intern

    •

    4801 Posts

    86

    0

    Posted December 19th, 2006 11:00

    Jjpeters18,
     
    You are welcome.
     
    Steve