UNSOLVED

paulbee

updated

21 years ago

Closed

P

paulbee

5 Posts

0

4636

October 17th, 2005 01:00

i8500 Standby Behavior Changed - Runs fans, etc.

I noticed recently that my Inspiron 8500 is behaving very differently in Standby than it used to. I reformatted while back, and this change in behavior could have come at the same time as the format, but I'm not sure.

First off, I'll throw out for the heck of it that I used to think of what the computer now seems to be calling Standby as Suspend. That doesn't necessarily mean the names the computer gives it has actually changed -- they're separate in Linux, which I have also used. But in case that's helpful at all, I used to think of it as Suspend. I went looking to see if they might be different modes in Windows, but could turn up no sign of such a thing, so there we are.

It used to be that when I closed the lid or otherwise put my computer in Standby, it was so quiet and subdued that, except for the slowly flashing power light, it seemed to be turned of. The fans did not run, and the system did not get hot. Now, the fans continue to run through Standby mode, and the system can remain rather warm; it is as though it is no longer taking nearly as many componentns offline upon going into Standby. It's doing things while in Standby that it never did before.

Also, the behavior of the power light in Standby has changed. For one, I have the impression that the light blinks faster with less fading in and out than it used to. I couldn't say this for sure, though. What I can say for sure is that when I put the computer into standby while docked, the power light on the docking bay and that on the computer used to blink together. Now, the power light on the dock stays on the full time and does not blink at all.

Based on the little bit of info I could scare up on the Internet, I wondered for a little while if when I reformatted and reinstalled WinXP it might have installed in APM mode instead of ACPI mode. That doesn't seem to be the case, though. I see the following references to ACPI in device manager:
*Batteries*
-Microsoft ACPI-Compliant Control Method Battery
-Microsoft ACPI-Compliant Control Method Battery [yes it is there twice]
*Computer*
-Advanced Configuration and Power Interface (ACPI) PC
*System Devices*
-ACPI Lid
-ACPI Power Button
-ACPI Sleep Button
-ACPI Thermal Zone
-Microsoft ACPI-Compliant System

This suggests from what I've read that Windows did in fact install in ACPI mode, so I'm not simply using a different APM mode or anything. Any idea what's going on? Besides just liking the quiet version of the Standby better, I wish I could get back the one where the computer didn't seem to be generating heat because this makes me worry about carrying it cased while in Standby; I'm concerned about overheating problems. I have, by the way, flashed my BIOS as a possible solution to the problem, but the problem was definitely not associated with a BIOS update. Any help in getting the old behaviors back would be great.

Thanks,
-Paul

Message Edited by paulbee on 10-16-2005 09:54 PM

  • paulbee

    5 Posts

    90

    0

    Posted October 21st, 2005 21:00

    A few more observations, in case it might give any ideas. The computer is very clearly operating at a higher operational levevl than normal or desired in standby. It will wake up if I press keys on the Logitech iTouch wireless keyboard I have connected. Also, the DVD drive will eject while the computer is in standby mode.

    I don't have to have anything wake it up besides the power button or opening the lid, so I have looked for a way to turn things like the keyboard off (as that might seem like a problem), but I've yet to find anything.

    -Paul