UNSOLVED

ReniPerez

updated

20 years ago

Closed

R

ReniPerez

5 Posts

0

5079

April 15th, 2007 23:00

How can I set up DVI on Inspiron 8600/Radeon 9600 Pro?

Hi, I have an Inspiron 8600 that I would like to dedicate as a media center connected to a Westinghouse 42" LCD HD monitor via an advanced port replicator. I've tried using the ATI panel to set this up and can get a duplicate screen on laptop and external 42" but I'd ideally like to have the lid closed on the laptop docked in it's station and just run off the external monitor via the docking station's DVI. Do I need to update the ATI control center? Is there a driver for the 8600 or the docking station that's needed? Has anyone had to connect an 8600 via the docking port's DVI to a large screen lcd with the computer closed? Any help would be appreciated. Reinaldo
  • Brooklyn8

    38 Posts

    174

    0

    Posted April 17th, 2007 00:00

    If you can't figure out how to do it with software, you can pop off top cover, and remove the little plastic rod that pushes down when the screen closes. I think you can just bend the little piece of metal and pull it out. Make sure the bend the metal back to the right place after it is out. I have no guarantee that won't break anything. But it looks like it would work. I have an 8500 I'm looking at.