
UNSOLVED
Closed
FanGUI acting weird Fans on and off pretty often
Hi guys
I just started to use FanGUI for my fans. Only used the monitoring before but it seems that the fans are acting strange now.
I set them up to come on at 55 and go off at 40. But right now it seems like the Bios and FanGUI are battleing over fan control, as the fans jump on and go off again, then jump on again and off again and so on. This behavior kind of worries me.
Any suggestions why this is happening?
Thanks
Cu
StarSheep
I just started to use FanGUI for my fans. Only used the monitoring before but it seems that the fans are acting strange now.
I set them up to come on at 55 and go off at 40. But right now it seems like the Bios and FanGUI are battleing over fan control, as the fans jump on and go off again, then jump on again and off again and so on. This behavior kind of worries me.
Any suggestions why this is happening?
Thanks
Cu
StarSheep
Responses (8)
Solutions (0)
I have this same problem with my laptop after I flashed my BIOS to A11. I then flashed it back to my original BIOS A06 and it still has this "hiccup" on/off action. When I put FanGUI to observer mode everything is fine.
Let me know how you fixed this cause I know that others may have this same problem.
- I will try that Reset of the Thermal things but I don't think it is much of a solution cause I have to do that all the time then when I turn on the laptop.
It seems more like that FanGUI cannot cope with the new BIOSES and that it needs to be updated.
I really hope anyone else knows something.
Cu and thanks
StarSheep icebergtamer
19 Posts
912
0
Posted May 19th, 2004 19:00
speaking of fangui
do any of you notice outrageous rpm's in the "fan speed" section of the aplet window?
mine read about 70-80 thousand rpms on low, and 140,000+ rpm on high. this seems ridiculously high in my opinion, could it perhaps by that they accidentally added an extra digit on the end? 7,000 rpm seems more beleiveable than 70,000rpm. or maybe my sensors are just broken :-p
CatoftheNight
1 Rookie
•
523 Posts
912
0
Posted May 19th, 2004 20:00
Yeah, fanGUI does that...What you all really need to understand is, The guy made it for 8000, 8100 and 8200 laptops ONLY. So if it doesn't work on your 8600, then you can't use the program. It's an unfortunate thing, I know, but if you really wanted support for it, Mail your 8600 to the http://www.diefer.de guy with $100 for his efforts, and I'm sure you could have it supported in no time :P
As for fan speeds...My CPU fan on low reads 126,000rpm. I just take of the one at the beginning, and a zero at the end and the fan speeds are the same as Dell Diagnostics says it is.
cobra_2004
2 Intern
•
217 Posts
912
0
Posted May 19th, 2004 21:00
I had that problem, so I just uninstalled fanGUI and restarted, everything was fine. I don't let fanGUI control my fans anymore. I just use it monitor temp and fan speed.

boppo
2 Intern
•
4376 Posts
912
0
Posted May 18th, 2004 21:00