
UNSOLVED
Closed
Can I assume that I need a new motherboard? (Inspiron 8200)
My 8200 had been working great for over 3 years (warranty ended in Dec 2005) until today. I had my laptop on with the screen closed. I came home from work and opened my laptop, but the screen would not turn on. I had to do a hard power down and once I had done that it wouldn't turn back on. The LEDs would turn on for a few seconds and then turn off. After about 6 tries it turned on and started to boot. It frooze during boot and I had to hard power down again. I tried another half dozen times and got it on again, but it froze while booting in safe mode. I tried diagnostic floppys but it freezes after I insert the 2nd disk and hit OK. Do you guys think it's the motherboard?
Responses (11)
Solutions (0)
- being the impatient person that I am =), I disassembled my laptop and ensured that everything was seated nicely. I put it back together and was given the BIOS message about my settings being lost, but while I was changing settings in the BIOS it froze. Is that about all I can do?
- ejn63, do you mean the battery charger module? When I took it apart I reseated the battery charger module although I didn't know what it was at the time. I also tried it without the CDRW and HD but it didn't make a difference. Since it sometimes boots up but freezes and when it does the power remains, do you think it could be the battery charger module? I had the laptop down to the system board, so I can't see it being an issue with something being loose. I called Dell spare parts and they quoted me like $660CAN for a refurb motherboard.On a side note, Ed C your system is almost identical to mine, althought I didn't have a chance to install my 2.4 GHz CPU yet. I saw a 64MB R9000 sell on eBay for like $240CAN. I figure I can get about $700 - $750 CAN for all of my parts. I wouldn't mind a D800 but they still cost a bit more than that.
Message Edited by trueg on 02-22-2006 07:50 PM
@trueg wrote:
being the impatient person that I am =), I disassembled my laptop and ensured that everything was seated nicely. I put it back together and was given the BIOS message about my settings being lost, but while I was changing settings in the BIOS it froze. Is that about all I can do?
To add to a recent post, simply click on it, pick Message Options, then Edit.hunerdspoke
2 Posts
746
0
Posted March 5th, 2006 23:00
The symptoms that your laptop shows (refusing to turn on, LEDs on for a few seconds then off) describe my 8200 to a tee. I got the laptop in January 2003 and within a couple of months, this started. I sent it in for service, and got it back 2 days later with a note that said they couldn't replicate the problem. For some reason it miraculously worked for the next year trouble free, but as soon as the warranty ran out, the problems surfaced again. Sorry for all that info that you probably didn't need.
Three years later I can hardly turn the laptop on without pushing down on the front right corner while pushing up on the left side. I finally decided to tear down the whole thing like you did, trueg, but before I did, I tried it after removing each of the easy components one at a time. Eventually, I discovered that without DIMM B (the one closest to the screw of the RAM cover) the system would boot perfectly and didn't freeze even while I walked around the house. I was so happy that I even danced with the thing while mp3's played, and it didn't freeze. I started looking at the cover and noticed that there wasn't a non-conductive shield over the entire cover (just the center). The decoupling capacitors on the RAM (Infineon brand) stick were under the exposed metal section of the cover, so I thought that maybe they were shorting out and crashing the computer. For lack of a better material, I covered the exposed metal sections of the cover with electrical tape, and the computer has been working for 4+ hours. I've walked around the house with it, shook it, and turned it every way I can think of, and it still works.
Based on the description of what you went through, I assume you probably understand what I'm talking about, but if you need I can get some pictures up to show you.
Hope this helps.- If this is the problem, I wonder why it would start after 3 years?
Currently, my laptop is in a dozen peices on my Kitchen table as I prepare everything for auction. I think I may give it a try when I get home. It's funny though, my laptop is worth so much more in peices than it is whole. I can easily get enought from the parts, especially if the motherboard is working, to buy a pentium-m with a better graphics card. - Well, I'm writing this from my laptop which seems to be working fine now. I put it back together and left DIMM B empty. I don't see any place where the memory could be coming in contact with metal.
So anyway, I feel silly that I didn't test the memory. Had I pulled out DIMM B earlier, I would have found the problem.
I'm still tempted to part out the laptop on eBay. The parts seem pretty valuable. They may not be for long and I should be able to get enough for a D800/8600.Message Edited by trueg on 03-08-2006 01:23 AM

trueg
144 Posts
736
0
Posted February 22nd, 2006 02:00