UNSOLVED

tedfor

updated

19 years ago

Closed

T

tedfor

2 Posts

0

12845

November 29th, 2007 15:00

Broken screw in monitor hinge for Insirion E1705

I have an inspirion E1705 laptop, and there are two hinges that hold the monitor to the base of the laptop.  Each hinge is connected with only one screw.  Last night, the head of one of the screws broke off.  Now the hinge won't move at all so I can't close the laptop or change the angle of the screen at all.  The stub of the screw is still stuck inside the monitor, so I can't just replace the screw.  My computer is out of warranty so I just opened it up.  I was able to remove the frame around the monitor and get to the screw, but the stub is completely inside still so there is no way to grasp it.
 
These screws are only around 2mm wide, which is probably too small to use a commercial screw extractor.  Any ideas about how I can remove this broken screw?
  • ronnyron99

    26 Posts

    817

    0

    Posted November 29th, 2007 17:00

    a computer store tech may can extract that screw but it will require the tech to take the whole LCD screen off
  • tedfor

    2 Posts

    817

    0

    Posted November 29th, 2007 18:00

    I was able to get the screw out with a drill and a screw extractor, but that didn't really help. When I went to put a new screw on I saw the hinge was bent a little, and I couldn't get it back on straight. The problem probably was when dell put this together they only put a screw in the left side of the hinge, when there was another screw hole on the right side of the hinge. After a couple years of use when it was never secured properly the hinge must have bent a little. The hinge on the other side also didn't use a second screw. I can't believe they only put one screw on each hinge when assembling this. I guess Dell couldn't spring for the extra 1/10 cent to screw the hinge in properly. It's pretty awesome too because this has got to be about as much inconvenience as can possibly arise from one little screw. Without it you can't open or close the screen at all. I'm also on my 4th power adapter and have two dead batteries in under two years. It is safe to say my next laptop will not be a Dell.
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    817

    0

    Posted November 29th, 2007 18:00

    Your next one may not be a Dell, but there's a good chance it'll be from the same company that made your Inspiron - it's the largest manufacturer of notebooks in the world, and the major supplier to Sony, Apple, Gateway/eMachines, HP, Compaq, Toshiba and a host of others. Dell didn't make the notebook - any more than the others make their own.


    You can replace the hinge assemblies inexpensively.

    http://www.parts-people.com/index.php?action=item&id=3258&prevaction=category&previd=141&prevstart=0
  • ronnyron99

    26 Posts

    817

    0

    Posted November 29th, 2007 21:00

    how you can be so sure that this company without a name is making all the major brands laptops? i like to know their name
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    817

    0

    Posted November 29th, 2007 21:00

    Quanta Computer and Compal Computer are Dell's two main suppliers. Between them they supply about 70% of all notebooks in the world, regardless of whose name is on the outside.

    I've seen many people rage against a faulty Dell, HP, Compaq, Sony etc. notebook, then buy another not realizing they just traded their lemon Chevy for a Pontiac.

    There's statistically little difference in hardware quality/reliability between brands - and since just a handful of other companies (Wistron, which used to be Acer, Clevo, Inventec, and a couple of others) supply almost everyone's notebook, that's not a surprise.



    http://en.wikipedia.org/wiki/Quanta_Computers

    http://www.fundinguniverse.com/company-histories/Quanta-Computer-Inc-Company-History.html

    Message Edited by ejn63 on 11-29-2007 06:27 PM