
UNSOLVED
500 gb hdd in media bay (m2300)
hello guys,
i just bought a seagate 500 gb hdd (partnumber: st9500420as) for my media bay drive. the support told me, that 500 gb were no problem.
i put it into the media bay, but it won't be detected so far. i restarted the precision m2300, but still the same. the hdd can't be detected.
bios version is a08.
any ideas what to do?
Responses (2)
Solutions (0)
bios verison is the latest.
indeed it seems that the new drive carrier (bought on ebay) is the problem. i changed it with an old drive carrier (with 120 gb sata hdd) and it worked. no problems so far.
but i have to contact the ebay seller, that the drive carrier isn't capable.
thx for your suggestions!

Fox2000
16 Posts
253
0
Posted July 6th, 2009 03:00
There are several possibilities here.
I would update BIOS to latest version and see if that will correct the issue.
If the Hard Drive carrier for the media bay is not a Dell part for this model, that could also be the problem. Check the cable that connects the hard disk to the carrier, those usually are very delicate and break easily if not careful. Check for bent/broken pins both in the media bay aand the carrier.
If issue persist, test the hard drive on another system or use a USB enclosure (those are usually cheap, $20 to $30, if you do not have another system to test).
If the hard disk works on another system and/or on a USB enclosure, then I bet you the issue is with the controller for the devices attached through the media bay. The media bay usually hold optical devices and those are usually ATA, PATA devices which are not compatible with SATA. This would be only a guess, but I bet the media bay only support ATA/PATA devices and not SATA. Check the User's Guide | Technical Specifications for your system, there you should find if what I guess holds ground, since the st9500420as hard disk is a SATA drive.