
UNSOLVED
XPS 400 Ram Upgrade Problem.
I have a problem upgrading the RAM on my computer. I bought a Kingston 2GB DDR2 PC2-5300 667MHz Ram stick. After I install it and power on the computer, it beeps and does not start up. Is this stick not compatible? It won't work both with the other stick (1 gig) or without it.
Responses (5)
Solutions (0)
The 2 gig might be bad or you might not be allowed to place a 2 gig stick into on slot. According to the specs it does not appear that the system will allow 2 gig per slot only up to 1 gig.
I am surprised that you only have one ram stick in the system now. Ram like I mentioned earlier should always be installed in pairs to get the best performance out of the ram.

Davet50
6 Operator
•
14442 Posts
325
0
Posted September 3rd, 2008 19:00
It should be compatable and work with no problems. Ram needs to be installed in pairs on your system to work properly. It sounds like you just added in one stick is that correct?
It is possible that the ram is bad. to test place one stick of ram into the ram socket on the motherboard closest to the processor and see if the computer will boot.
Do this with each stick of ram one at a time untill you test them all.