UNSOLVED

SnprSlick

updated

19 years ago

S

SnprSlick

7 Posts

0

5530

June 28th, 2007 01:00

Which CPU do I have?

I have a Pentium 4 Dual Core 3.2 Ghz Is it 64bit compatible?
  • CHSIsupplier

    807 Posts

    307

    0

    Posted June 28th, 2007 01:00

    I assume that's a Pentium D...in which case, yes.
  • SnprSlick

    7 Posts

    307

    0

    Posted June 28th, 2007 01:00

    My computer doesnt say it is a Pentium D Here is my DxDiag readout Intel Pentium 4 3.2Ghz (2 CPUs) So no, not a Pentium D
  • SnprSlick

    7 Posts

    307

    0

    Posted June 28th, 2007 02:00

    I just looked. It supports Hyperthreading. So it shows up like 2 processors. I looked at this chart: http://www.intel.com/products/processor_number/chart/pentium4.htm and it says the 3.20 Ghz processors support 64bit. But when I try to install Vista 64bit, it says it cant be installed on this computer
  • Ghanima

    117 Posts

    307

    0

    Posted June 28th, 2007 05:00

    Go here:
     
     
    and download the Intel Processor Utility. Install it, then run it... It gives some general info about the processor you're using. If you go to the "CPU Technologies" tab, and look for the "Intel(R) Extended Memory 64 Technology [EM64T]" that will tell you if your processor is 64bit capable. If it says No, then you only have a P4 with hyperthreading and those, as far as i know, are not 64bit capable. If it does say Yes, you may have to enable EM64T in your system BIOS prior to installing a 64bit OS [in most cases you won't have too].
     
    Hope that helps!