UNSOLVED

mnlance

updated

26 years ago

M

mnlance

2 Posts

0

4393

February 6th, 2001 02:00

usb hub

does anyone know what drivers windows uses for external (genric) hubs and where those drivers are located in windows and the windows 98 disk?
  • csock

    25 Posts

    190

    0

    Posted February 6th, 2001 05:00

    Hey, I have 4100 with Win '98.
    As far as I know, you don't need a special driver. The beauty of the USB system is that you just plug it in. Mine is listed in my controll panel/system/ under device manager as usb hub.

    I purchased a "fancy" Belkin bus station and my hardware peripherals did not like it at all. So I purchased a bare bones 4 port hub at Circut City and it works like a charm.

    Good luck.
    Are you having a specific problem?

    csock
  • mnlance

    2 Posts

    190

    0

    Posted February 6th, 2001 10:00

    I've been having problems and the system no longer identifies the hub so I need to reinstall the drivers but don't know which ones. So that is what I'm trying to track down. Before that, the hub worked although the usb connections through it were a bit more sensitive.
  • abab

    2 Posts

    190

    0

    Posted February 13th, 2001 05:00

    Check the procedure I outlined in my post on the thread "Re: USB Hubs" beginning with an initial post 02/03 8:58PM by Generand - it might work for you also.