UNSOLVED

hyperlink11

updated

20 years ago

0

7262

September 6th, 2006 18:00

update failed on GK280

the boot process takes too long, when i checked the bios setup, the section where you see the boot order and process cannot be changed, when I tried to update the BIOS, I get an error message " Update failed,cannot access flash memory device" ... I have cleared cmos, I have new battery, I unplugged all devices and reseated everything but still having this stupid problem... any help wil be appreciated.
  • MorJo15

    42 Posts

    117

    0

    Posted September 7th, 2006 19:00

    What part of the boot process is slow.  Once the Dell logo goes away the BIOS load is over.   Is windows booting slow.  Please explain where the slowness is.
  • 117

    0

    Posted September 7th, 2006 22:00

    after the logo F2-F12 screen goes away, a blinking cursor top left stays for 5-7 minutes then windows load , if i go to the BIOS, under boot order or sequesnce, i cannot change anything after I hit ENTER, i won't allow me, as if non of the drives are bootable , therefore the boot up takes too long, i have reset the cmos, new battery, tried to clear NVRAM but unsuccessful, the ALT+E does not do anything , and when I finally decided to flash the BIOS, it gave me an error that update failed, cannot find flash BIOS memory.

     

    Thanks for any help

  • MorJo15

    42 Posts

    117

    0

    Posted September 8th, 2006 19:00

    Do you see this delay if you try to boot from a CD?   If so, it sounds like a BIOS issue.  I would get with support to see if you are still under warranty.