UNSOLVED

night_2004

updated

18 years ago

N

night_2004

1 Rookie

•

41 Posts

0

20228

May 28th, 2008 04:00

Unidentified USB Device (possibly defective) XPS 420

So I have an "Unknown Device" on my XPS 420.  I just reinstalled Vista (been using XP since I bought the machine), and this is the first time it has shown up.

 

Vista says it is on Port_#0004 Hub_#0008 and from what I can tell that belongs to the ICHR9 USB2 Enhanced controller marked as 293A.  The controller has 6 ports (supposedly), and one is the Unknown Device.

 

Can anyone help me identify what this is?  Thank you! 

  • ronss

    2 Intern

    •

    2060 Posts

    •

    3 Points

    512

    0

    Posted May 28th, 2008 06:00

    did you install your chipset driver???

     

    http://support.dell.com/support/downloads/driverslist.aspx?c=us&l=en&s=gen&ServiceTag=&SystemID=DIM_PNT_9200_XPS_420&os=WLH&osl=EN

    Message Edited by ronss on 05-28-2008 03:01 AM
  • tolstoy143

    209 Posts

    512

    0

    Posted May 28th, 2008 20:00

    Did you install the CAB-200 and Bluetooth software?  The latter (BT) has the driver for the BT mini-receiver, which will otherwise show up as Unknown.  This is frequently asked as most peopleonly install the drivers, not the Bluetooth application (which actually includes a driver).
  • night_2004

    1 Rookie

    •

    41 Posts

    512

    0

    Posted May 28th, 2008 20:00

    #2: Yes, I did install the chipset drivers . . . but I'll double check just in case when I get home.

    #3: I did not have a BT or CAB installed on the PC.

  • tolstoy143

    209 Posts

    512

    0

    Posted May 28th, 2008 20:00

    If you have the media card reader then yes you do have CAB-200 w/ BT.
  • night_2004

    1 Rookie

    •

    41 Posts

    512

    0

    Posted May 28th, 2008 22:00

    I didn't order it when I got the PC, since I don't use BT and I already had a media card reader in my 2407WFP.
    Message Edited by night_2004 on 05-28-2008 06:05 PM
  • tolstoy143

    209 Posts

    512

    0

    Posted May 28th, 2008 23:00

    Hmmm, ok.  Let's see... the ATI TV Tuner gets detected by Windows Update, and I don't have a Media Accelerator so I don't know about that one.  The BT was the one thing that always stumps people.

     

    Have you tried inserting the driver disk that comes with the Dell (Dell Resource CD)?  That theoretically auto-detects your hardware and presents the drivers you need.  Otherwise I got nothing, sorry.

  • night_2004

    1 Rookie

    •

    41 Posts

    512

    0

    Posted May 29th, 2008 00:00

    Well, I think I found the problem. It wasn't the chipset, BT, CAB200, TV Tuner (don't have that either), or anything else.

     

    The rear quad ports on the mainboard are starting to malfunction and do not work. If I plug any device in there, I can consistently get the "unknown device" issue.

     

    I'm going to make an image of Vista using Acronis and revert back to my XP installation as well. I didn't see this problem in XP, but I'm going to double check right away. You'd think I would have noticed this earlier, unless the mainboard quad USB just went out completely in the last two days.

     

    I'll keep you guys updated, but either this means I need to go back to XP or I need a new mainboard.

     

    EDIT

    Its a Vista issue.  As soon as XP booted up, the USB devices were recognized.  Back to Vista, and the same devices that just worked in XP did not work in Vista.  And we're talking about a hard drive and a USB keyboard...nothing extraordinary. 

    Message Edited by night_2004 on 05-28-2008 09:41 PM
  • night_2004

    1 Rookie

    •

    41 Posts

    512

    0

    Posted May 29th, 2008 03:00

    Well, I've completely updated the OS (Vista SP1), the drivers, the chipset utility, everything.  Ran a full Windows Update as well.

     

    The USB ports still do not work in Vista.  But my XP installation is happily laughing away.

     

    I'm going to try one more thing tomorrow, and reinstall Vista and preload the latest ICH9R drivers from a floppy.  Its possible (I guess) that Vista just doesn't work "out of the box" like it is supposed to on this machine.

    Message Edited by night_2004 on 05-28-2008 11:32 PM
  • tolstoy143

    209 Posts

    512

    0

    Posted May 29th, 2008 12:00

    What version of Visa are you installing, x86 or x64?  Also, what type of disk are you trying to install with?  A Dell disk, your own retail disk, TechNet download with SP1 slipstreamed, or did you per chance use a tool like nLite to make a custom slipstreamed disk? 
  • night_2004

    1 Rookie

    •

    41 Posts

    82

    0

    Posted May 29th, 2008 13:00

    Vista Ultimate x86, from an academic (retail) disc.  I'm not using nLite.

     

    I've got this horrible feeling that I'm not doing something that I should be to get this working.