UNSOLVED

ZenDavid

updated

12 years ago

Z

ZenDavid

3 Posts

1

362025

January 7th, 2015 09:00

U2415 Monitor: "no dp cable"

Hello all, hopefully someone can help with this question.

I have an DELL Inspiron 580 which is approx 3.5 years old now.  Recently, the monitor failed, so I purchased a new DELL U2415 monitor from Amazon expecting it to work out of the box.  However, when I attempt to connect the monitor, i get "no dp cable".  Fortunately, I have another (very old) monitor which I am able to use, without which I would be really stuck.

Two cables were supplied  with the new monitor. One, for which there is no connecting port on the PC. The other has a USB on one end (which I have connected to the PC). That is the only possible way of connecting the monitor using the cables supplied.

I have the drivers and the driver is recognised at installation. But, the install program appears not to be detecting the monitor (even though it is connected to the USB port), so will not allow me to install the driver.

Do I need a DP -> VGA cable? Is that the problem?

Thanks

  • ZenDavid

    3 Posts

    9259

    0

    Posted January 7th, 2015 11:00

    I should add that the original (failed) monitor was an ST2320L VGA, DVI-D, HDMI.

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    9259

    0

    Posted January 10th, 2015 06:00

    The U2415 User's Guide page 6 shows us that the monitor shipped with the following cables =
    Power
    mDP to DP (DP = DisplayPort)
    USB 3.0 Upstream

    The U2415 User's Guide pages 10 and 11 show us that the monitor has the following video in ports =
    HDMI 1920x1080 60Hz
    HDMI 1920x1080 60Hz
    DP 1920x1200 60Hz
    mDP 1920x1200 60Hz

    The Inspiron 580 has integrated blue VGA out and black HDMI out. It also could have come one of nine possible add-in video cards. So we need to know, did the Inspiron 580 have an add-in video card? If not, simply purchase an HDMI to HDMI cable locally and setup this way =
    Inspiron 580 HDMI out --> HDMI to HDMI cable --> U2415 HDMI in


    DELL-Chris M (old account)

    #IWork4Dell

  • ZenDavid

    3 Posts

    9259

    0

    Posted January 11th, 2015 08:00

    Hello Chris

    According to the details of my system configuration, I have :

    GRAPHICS : 1 GB ATI RADEON HD 5450

    Which I assume was the default choice at the time. I have modest requirements, no gaming for me

    I have already returned the monitor to the vendor and ordered an (inexpensive) replacement 22in VGA monitor, which should arrive in the next day or two

    I intend to replace this PC in another 18 months or so, so this is an adequate solution for now.

    Appreciate the information though.

    Thanks

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    9259

    0

    Posted January 11th, 2015 17:00

    The KP8GM AMD Radeon HD 5450, 1GB, M114A has the following video out ports =
    VGA blue
    DVI-I white
    HDMI black

    So the monitor must connect to one of those three ports, not the onboard video out ports of the Inspiron 580.


    DELL-Chris M (old account)

    #IWork4Dell