
UNSOLVED
PCI/AGP green card cover on Dimension 8200
After my failed attempt at the email service for dell, i've decided to come here. to put it simply, my computer cards are hanging loose from my computer and my computer is on its side to prevent the cards from falling out of their slots, but they are very loose. The green cover for the slots doesn't snap back into place properly anymore. (and this was only opening it 1 time to install a new card.) Trying to bend the green piece back into place didn't work. i'd like to know where i can get some screws so i can make those cards hold in place so if i ever have to move my system, they will not move around. this was a poorly designed system and Dell should hand out free screws to its customers for those that want to use screws instead of the new system.
Other than that, i am very happy with this system.
Message Edited on 07/17/02 02:37AM by jonfields
Message Edited on 07/17/02 02:42AM by jonfields
Other than that, i am very happy with this system.
Message Edited on 07/17/02 02:37AM by jonfields
Message Edited on 07/17/02 02:42AM by jonfields
Responses (8)
Solutions (0)
Timdrouilard
628 Posts
248
0
Posted July 17th, 2002 13:00
The holes are not the standard size for the screws you normally use to hold cards in with. The holes are a tad bigger. Just enough bigger so that if you use a standard size screw, it will end up stripping the threads on the hole in the case.
What i ended up doing on mine, is to cut a small wedge of high-density foam (the white stiff foam), and insert it between the green hooked end and the other green portion of the hold-down clamp.
The thickness of the foam pushes the green hook out enough to securly latch the hook in the metal bracket, while at the same time the foam has a slight bit of give to it.
Works like a champ, my cards are now securely held in place.
Timdrouilard
628 Posts
248
0
Posted July 17th, 2002 17:00
I agree that perhaps Dell should provide some sort of fix, but i just decided that i had a choice of either calling Dell and getting them to do something about it, or simply use a little piece of foam and fix it myself in 2 min...
If you're looking for someone at Dell to actually respond, then you'll be far better off contacting them by phone.
Sometimes Dell people respond to messages in these forums, but most of the time here in these forums, we help each other.
If nothing else, after you transport your PC to college, simply open the top and reseat the cards if needed.
Serpentor100
14 Posts
248
0
Posted July 18th, 2002 06:00
are you sure that all the cards are in all the way so that you can see the holes on the outside of each slot. Can you actually get the green lever to close?
Timdrouilard
628 Posts
248
0
Posted July 18th, 2002 12:00
On my system, the green latching device has a hook on one end that passes through a hole in a stamped metal bracket and is supposed to catch on the edge of that hole.
The hook on my green latch lines up with the hole in the metal bracket just fine, and it passes through the hole just fine. The problem is the hook on the green latch does not have any side tension to force it to catch on the metal bracket as it passes through it.
By inserting a small piece of foam between the hook arm and the main portion of the green lever, it induced enough sideways tension for the hook to engage the metal bracket as it passes through the hole.
- jonfields,
Thanks for using Delltalk. I apologize for your issues.
The metal tab at the lever contact/latching point that engages the green lever can become bent. Try bending it back and verify all PCI/AGP cards are seated properly. If the green lever is broken, you can have it replaced by contacting Dell Technical support.
Respectfully,
Mel
Delltalk Moderator

kippy50
895 Posts
248
0
Posted July 17th, 2002 12:00
4100
1gig
Creative SB Live
LG CDRW
XPHome - 256 Ram
Motorola SM56 Modem
Nvidia GeForce2 MXMX
__________________________________________
Helpful Xp Links
http://www.winxpfind.com
http://www.aumha.org/supp1b.htm
http://www.winxptop.com/winxptop/
http://www.generation.net/~hleboeuf/
http://www.onecomputerguy.com/windowsxp_tips.htm