UNSOLVED

onashi

updated

20 years ago

O

onashi

15 Posts

0

9825

February 4th, 2007 12:00

Optiplex GX1 PCI communication driver

I've done a clean reinstall of Windows 2K Professional and when i go into device manager i'm getting ? against Other devices - PCI Simple Communications Controller. I thought this was a modem driver and tried to install the 3Com Controller-based v.90 Modem from dell website, but it hasn't detected any hardware changes so unable to update driver and connect to internet. I unzipped the file to the specified location and none of the files are updating as the driver. Maybe i'm installing the wrong driver, but not sure. Would be very grateful if someone could advise what I should be installing for the PCI Simple Communications Controller? Cheers v much onashi
  • mombodog

    2 Intern

    •

    12735 Posts

    178

    0

    Posted February 4th, 2007 18:00

    Use this utility to identify it
  • onashi

    15 Posts

    178

    0

    Posted February 6th, 2007 20:00

    Hi, Thanks. Ran the utility and downloaded the driver, question mark gone, but i still cant connect to the internet. It looks like it has a lan connection when I connect it to my other pc which has a wireless internet connection but when i connect directly to the router theres no connection. (connecting to other pc was test to see if it can connect to internet) I notice the ethernet cable light on the back stays solid when connected to the other pc, but when connected to router it flashes. What does this mean? I've tried changing the cables incase it was that but the same happened. When i do ipconfig connected to router i'm getting cable disconnected, but when connected through other pc am getting an ip address but cant display any pages. I'm trying to connect to the internet directly through the router, is there anything you could advise me to try next before i give up? Any advice is greatly appreciated:) Thanks v much onashi
  • mombodog

    2 Intern

    •

    12735 Posts

    178

    0

    Posted February 7th, 2007 02:00

    Do  a properties on you local area connection in My Network Places, make sure DHCP is enabled in TCP/IP properties. If it is already try this  http://support.microsoft.com/kb/299357/en-us
     
    All routers are different on how they can be configured, I assume you have 1 PC that has an Internet connection thru the router? I would consult the owners manual for that router, and check the configuration of the router software.
     
    If all else fails try this tool from microsoft.  http://support.microsoft.com/kb/914440/en-us
  • onashi

    15 Posts

    178

    0

    Posted February 7th, 2007 06:00

    Cheers....I note the links are for XP, but its win2K prof i'm running on it. Will it be the same? Thanks onashi