
UNSOLVED
Old IDE Hard Drive to Inspiron 620 MT
Just got Inspiron 620MT to replace my Dimension 3000. I have 160GB secondary IDE hard drive on my old computer with tons of pictures in it. I understand this is IDE drive and 620MT has SATA MB.
Questions:
1) Can I add this drive to 620 MT using one of the adpater like this?
2) Any downside of doing this?
3) Any other option of adding this drive beside adapter?
Responses (3)
Solutions (0)
Use a Drive Wire. Its universal. Transfer the data and you are done.
DriveWire - Universal Hard Drive Adapter
The perfect tool for IT departments, techies, or anyone that needs to interface to a hard drive.
Provides USB 2.0 interface to:-
- - SATA hard drives & SSDs
- - 44 pin PATA/IDE 2.5" notebook drives
- - 40 pin PATA/IDE 3.5" desktop drives
- Includes Cloning Software:
Apricorn EZ Gig®
ShirtPocket SuperDuper!
-
The adapter that you asked about would not work. In theory this similar one would, but it is not ideal:
http://www.amazon.com/PSATA-Ultra-SATA-Converter-Adapter/dp/B003AG5CN6/ref=pd_cp_e_3
The problems with this adapter include the fact that it does not come with a power adapter that you can use (it is intended to conennect to a floopy drive power lead which your system does not have) so you will have to purchase a power adapter to get power supplied to the IDE hard drive. It also means wasting a high performance SATA controller with what is a low performance IDE drive. And it means wasting a drive bay with this low capacity disk when a large capacity one would fit in the same space.A better and easier solution would be to purchase a enclosure for the old 3.5" IDE (aka PATA) drive from the Dimension 3000 that would allow you to connect it to your new machine via a USB port. This can be done temporairly to copy your data off of the old drive and does not have to be left connected at all times.
Here is a good unit that is also inexpensive, just $19.99 delivered:
www.newegg.com/.../Product.aspx
And you can enjoy an additional 20% discount if you use this coupon code at checkout:
BTENJNA24

shesagordie
12 Elder
•
46017 Posts
250
0
Posted January 9th, 2012 11:00
makunag
1) Yes, and adaptor can be used, but you need a PATA/IDE to SATA, not a SATA to PATA/IDE as shown in your link.
2) Yes, there can be issues with using the adaptor, very often they either don't work, or fail.
3) Personally, I would and have used, a powered USB 2.0 IDE external enclosure, similar to THIS and attach the drive to a USB port.
Bev.